Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Polycom PowerMic
Summary of Contents for Polycom PowerMic
- Page 1 Installing the PowerMic ™...
- Page 2 Polycom, Inc., 4750 Willow Drive, Pleasanton, CA 94588 www.polycom.com Polycom and the Polycom logo are registered trademarks of Polycom, Inc. PowerMic is a trademark of PictureTel Corporation. The information contained in this document is subject to change without notice. Polycom assumes no responsibility for technical or editorial errors or omissions that may appear in this document or for the use of this material.
- Page 3 Installing the PowerMic About the The PowerMic™ is a microphone that sits unobtrusively on the conference table and picks up voices within a 14-foot (4.3-meter) PowerMic radius. For a large conference room with many participants, you can connect up to four microphones.
- Page 4 2. If you ordered the extension kit, check that you also have: Another PowerMic One 10-foot (3.0-meter) cable One 25-foot (7.6-meter) cable 3. If any parts are missing, contact your Polycom service provider.
- Page 5 Connecting the Cable to the PowerMic Connecting the To connect the microphone cable to the PowerMic: Cable to the 1. Hold the PowerMic upside down in one hand. PowerMic 2. Hold the end of the microphone cable level with the PowerMic.
- Page 6 INSTALLING THE POWERMIC Connecting the To connect the microphone cable to the system: PowerMic to the 1. Locate the microphone connector on the back of the computer System box or electronics module. The connector has the icon next to it. See the collaboration system installation instructions for an illustration of the system’s back panel.
- Page 7 Unplugging the Microphone Cable Unplugging the If you need to unplug the microphone: Microphone 1. Grasp the cable collar and gently pull it toward you using your Cable thumb and index finger. 2. While holding the collar, carefully unplug the cable from the connector.
- Page 8 25-foot (7.6-meter) cable . Align the PowerMic microphones by pointing the connectors in the same direction. Note: You can connect a total of four PowerMic microphones. They must be at least 10 feet (3.0 meters) apart.
-
Page 9: Service And Support
Service and Support Service and For support or service, please contact your Polycom service provider or call Polycom Technical Support. You can find phone Support numbers for Technical Support in your area at the Polycom web site, www.polycom.com. Specifications Power: +12V DC Dimensions: Diameter: 6.0 in. - Page 10 INSTALLING THE POWERMIC...
Need help?
Do you have a question about the PowerMic and is the answer not in the manual?
Questions and answers