Advertisement
Quick Links
STORAGE STATION
2090H x 1820W x 540Dmm
ITEM NO: GOS097
Very Important: Unpack the unit and confirm that you have all the parts listed. Assemble
the unit on a solid, level surface. Avoid carpet. You will need the assistance of a second
person during assembly. Safety tip: For added safety and support we recommend you
fix unit to a wall. You will need the following: Rubber mallet, Phillips head screwdriver,
adjustable spanner, drill and 3mm drill bit.
NOTE: This product has been tested to safely carry a load of
up to 1300kg evenly distributed, when properly installed and
maintained. Heaviest items to be loaded on lowest shelves.
Parts List
WIRE SHELVES
FOOT END CAPS
BRACKETS 'A'
BRACKETS 'B'
BRACES 'C'
LEGS 'D'
TIMBER BENCHTOP 'E'
BOTTOM PEGBOARD 'F'
TOP PEGBOARD 'G'
M16 X 13MM
PANHEAD HEXBOLT 'H'
HEX NUT M6 'J'
M5 X 16MM SELF
TAPPING SCREW 'K'
NOT TO SCALE
PLEASE NOTE: Tip-over prevention kit included
(refer to last page for installation).
SERIES >>
X4 'D'
X 3
X 4
X 7
Note: Keyhole
Upright Position
X 8
Step 1: Add Foot End Caps to bottom of Legs
'D'. Slot Brackets 'A' into the bottom of Legs 'D'
as shown in the diagram. NOTE: Flat edges face
X 8
outwards. Lock rivets to the bottom of the keyhole
by tapping the Brackets with a rubber mallet.
X 4
X 1
X 1
'B'
'C'
'A'
X 1
'A'
X 4
X 4
X 4
Step 3: Assemble the benchtop frame by slotting
brackets A and B followed by braces 'C'. Please
note: All brackets for this step need to be slotted
into the 25th and 26th keyhole from the bottom of
part 'D' (legs).
Top Shelf Capacity: 200kg
Benchtop Capacity: 500kg
Middle Shelf Capacity: 300kg
Bottom Shelf Capacity: 300kg
'A'
Step 2: Slot Brackets 'B' into the bottom of Legs
'D' as shown in the diagram. Slot Braces 'C' into
position through the holes provided on Brackets 'A'.
NOTE: Flat edges face outwards. Lock rivets to the
bottom of the keyhole by tapping the Brackets with
a rubber mallet.
'B'
'C'
Step 4: Repeat Steps 1 and 2 for the middle
shelf. Lay the wire shelf and Timber Benchtop 'E'
between brackets as shown in the diagram.
'B'
'A'
'B'
'C'
'A'
'C'
'A'
'E'
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Pinnacle Heavy Duty Series
Summary of Contents for Pinnacle Heavy Duty Series
- Page 1 SERIES >> STORAGE STATION Top Shelf Capacity: 200kg Benchtop Capacity: 500kg 2090H x 1820W x 540Dmm Middle Shelf Capacity: 300kg Bottom Shelf Capacity: 300kg ITEM NO: GOS097 Very Important: Unpack the unit and confirm that you have all the parts listed. Assemble the unit on a solid, level surface.
- Page 2 WARRANTY CONDTIONS: Any claim under this warranty must be made within 1 year of the date of purchase of the product. To make a claim under this warranty, take the product (with proof of purchase) to any Bunnings store (see www.bunnings.com.au for store locations). Pinnacle Hardware bears reasonable, direct expenses of claiming under the warranty. You may submit details and proof of purchase to our support centre for consideration.
Need help?
Do you have a question about the Heavy Duty Series and is the answer not in the manual?
Questions and answers