Page 1
As shown 4. Brief Description This Super Interactive Switch Box controls the Maxi, Aquatic, Ball and Midi Bubble Tubes, Bubble Wall and ROMPA® Waterless Rainbow Tube. Choose the colours and the flow of the bubbles by pressing appropriate buttons. 5. Contents •...
Page 2
For further interactivity, this switch box can be used with different ROMPA® switches, giving the user nine different display variations. Note: When used with a switch, the switch overrides the circular switching box provided. There is a feedback click when the switches are pressed.
Page 3
4. To adjust the speed of the light change/flash rate use the SPEED and DELAY buttons underneath labelled COLOURS. YOU CAN ADD AN EXTERNAL SWITCH (JACK) – When a ROMPA® switch is plugged into the Jack Socket on the side of Push Button Switch Box, most other controls will be over-...
Page 4
Super Interactive Switch Box: 1. With the left hand dial set to COLOURS and the right hand one to FLASH ON, then the Bubbles will be on all of the time and the Lights will come on when the ROMPA® switch is activated.
Page 5
9. With the left hand dial set to BOTH and the right hand one to HOLD, then the Lights and Bubbles will be on all of the time and both will stop when the ROMPA® switch is activated and will only start when the ROMPA® switch is activated again.
Need help?
Do you have a question about the 17274 and is the answer not in the manual?
Questions and answers