Download Print this page
CaryMart 0020301 Manaul

CaryMart 0020301 Manaul

Wireless remote control switch kit

Advertisement

Quick Links

Wireless Remote Control Switch Kit (Model 0020301 S1PU-DC-ANT3 & C-4)
Package Include:
4 x Receiver: S1PU-DC-ANT3
2 x Transmitter / Remote control: C-4
1 x User manual
Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship,
offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks,
motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Power Supply: Four working voltage versions, DC 6V, 9V, 12V, 24V.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipments. The output terminals are NO / NC (normally
open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
High Power: Each channel can work at maximum load current 30A.
With
wired control
terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
With external telescopic antenna, the receiver have a farther working range.
You can control the equipments by using the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With characteristics of reverse power protection and over current protection.
Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
A 4-button transmitter controls 4 single-channel receivers, and each button controls a receiver.
Receiver Parameters:
Model No.: S1PU-DC06-ANT3 / S1PU-DC09-ANT3 / S1PU-DC12-ANT3 / S1PU-DC24-ANT3
Power Supply (Operating Voltage): DC6V (S1PU-DC06), DC9V±1V (S1PU-DC09), DC12V±1V (S1PU-DC12), DC24V±2V (S1PU-DC24)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-12 AWG
Working Frequency: 433.92MHz
Channel: 1CH
Control Modes: Self-locking, Momentary, Interlocking
Static Current: ≤6mA
Maximum Load Current: 30A / each channel
Operating Temperature: -20 ° C to +70 ° C
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm
Matching Transmitters:
The receiver can work with different transmitters.
You can use a receiver to work with a one or two buttons transmitter, and each transmitter controls a receiver, such as model C-2 / C-1 (100M),
CWB-2 / CWB-1 (50M, waterproof), or CB-2 / CB-1 (1000M) etc.
You also can use four receivers to work with a four buttons transmitter, and each button controls a receiver, such as model C-4 (100M), CWB-4 (50M,
waterproof), or CB-4 (1000M) etc.
Working Range:
With a transmitter (such as C-4) to form a complete set, the maximum working distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will
be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this
maximum working distance.
If you want to have a further working range, you can use a powerful transmitter, such as CB-4 transmitter.
Transmitter Parameters:
Model No.: 0021003 (C-4)
With Sliding Cover: Slide up when it doesn't work (to protect the button). Slide down the button will appear.
Channel / Button: 4
Button Symbol: 1, 2, 3, 4
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Encoding Chip: PT2262 / PT2264 / SC2262
Transmitting Distance: 100m / 300ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 58mm x 39mm x 16mm
SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com
E-Mail: sale@carymart.com

Advertisement

loading

Summary of Contents for CaryMart 0020301

  • Page 1 Wireless Remote Control Switch Kit (Model 0020301 S1PU-DC-ANT3 & C-4) Package Include: 4 x Receiver: S1PU-DC-ANT3 2 x Transmitter / Remote control: C-4 1 x User manual Feature: Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc.
  • Page 2 1, 3, 4 are turned off. Press button 3 of the transmitter: The relay of the receiver 3 is activated (connect the terminals B and C, disconnect the terminals A and C), and the SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: sale@carymart.com...
  • Page 3 Operation: Press and hold the learning button of receiver until signal LED flashes slowly; then release the button, signal LED keeps slow flash. That means all stored codes have been deleted successfully. SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: sale@carymart.com...
  • Page 4 B, C = Normally Open; A, C = Normally Closed Control AC Lamp AC Lamp Neutral wire AC Power Supply Live wire External Device DC Power Supply B, C = Normally Open; A, C = Normally Closed SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: sale@carymart.com...

This manual is also suitable for:

S1pu-dc-ant3C-4