Havis DS-DA-603 Owner's Manual

Owner's Manual
Havis USB-C Hub
DS-DA-603

Before Beginning

Havis is pleased to provide this Owner's Manual to aid in the
proper installation and use of the DS-DA-603 USB-C Hub.
For questions regarding the set-up of your DS-DA-603 USB-C Hub,
please contact Havis at 1-800-524-9900 or visit
for additional product support and information.
• THE POWER CABLE INCLUDED WITH THE DS-DA-603 IS UNIQUE
TO THIS PRODUCT. DO NOT USE THE DS-DA-603 POWER CABLE
WITH ANY OTHER HAVIS DEVICE. DO NOT USE ANY OTHER HAVIS
DEVICE'S POWER CABLE WITH THE DS-DA-603.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE
BEGINNING INSTALLATION.

Certifications

CAN ICES-3 (A)/NMB-3(A)
FCC STATEMENT
This device complies with the requirements of the Code of Federal Regulations listed below:
FCC Title 47 CFR, Part 15 Class A for a digital device.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
EU DECLARATION OF CONFORMITY [CWN1]
Manufacturers Name: Havis, Inc.
Manufacturers Addresses: 47099 5 Mile, Plymouth Twp, MI 48170 USA
75 Jacksonville Road, Warminster, PA, 18974, USA
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product name: USB-C Hub
Model: DS-DA-603. May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following directives, standards, or other normative documents:
UN ECE Regulation 10 UNECE Regulation 10.05, Paragraph 3.2.9; Clauses 6.5, 6.6, 6.7, 6.9; "Uniform provisions concerning the approval of vehicles
with regard to electromagnetic compatibility"
EMC Directive 2014/30/EU EN 50498:2010, "Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles"
RoHS Directive 2011/65/EU EN 50581:2012, "Technical documentation for the assessment of electrical and electronic products with respect to the restriction
of hazardous substances"
The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and[CWN2] of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
Supplementary Information:
The object of the declaration described above is in conformity with the relevant Union harmonization legislation.
This product requires the use of a recommended E Marked automotive power supply when used within vehicles.
Signed for and on behalf of Havis, Inc:
40799 5 Mile, Plymouth Twp, MI 48170, USA August 13, 2019 Bruce Jonik, Director of Engineering , Havis, Inc.
DS-DA-603_OMN_10-19

Specifications

www.havis.com
Power Supply Input
Dimensions
Weight
Operating Environment
Storage Environment
12V DC-In
5.54" ( 14.1 cm) W x 4.83" (
12.3 cm ) D x 1.00" ( 2.54 cm ) H
0.40 lbs. (0.18 kg)
-30° C to 70° C (-22° F to 158° F)
-40° C to 85° C (-40° F to 185° F)
Havis, Inc.
75 Jacksonville Road
Warminster, PA 18974