Related Manuals for Schweißkraft VarioProtect XXL-W-2 TC
Summary of Contents for Schweißkraft VarioProtect XXL-W-2 TC
- Page 1 Operating Instuction Automatic Welding Helmet VarioProtect XXL-W-2 TC VarioProtect XXL-W-2 TC...
-
Page 2: Table Of Contents
Passing on as well as copying of this document, the use and distribution of its content are prohibited if not explic- itly permitted. Contraventions are liable to compensa- tion. Subject to technical modifications and error. VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 3: Introduction
VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 4: Safety Regulations
- Check the welding helmet for visible damage and defects before use. Repair defects and damage im- mediately. - Do not use the welding helmet in wet environments, rain, etc. VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 5: Indended Use
Indended Use Indended Use Technical Data Der VarioProtect XXL-W-2 TC is suitable for electrode, Technical Data Vario-Protect XXL-W-2 TC MIG/MAG and TIG welding and for grinding. Length (Product) The welding helmet VarioProtect XXL-W-2 TC is exclusi- approx. [mm] vely intended to protect the eyes of welders against... -
Page 6: Description
8 Setting the sensitivity (SENSITIVITY) 9 Dark to light transition time (DELAY) 10 Setting the protection levels (SHADE) 11 Operating mode switch 12 Identification 4 / 4-8 / 9-13 SWM 1/1/1/1/379 CE VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 7: Product Characteristic And Setting Options
„Sensitivity“ to a lower position until the filter returns to The VarioProtect XXL-W-2 TC is ready for immediate the light state (do not hold the welding helmet against a use upon delivery. Before you start welding, all you need light source, but over the workpiece). -
Page 8: Setting The Shade Control
If the battery indicator lights up and the filter does not stance from the eyes to the filter lens is uneven, reset the darken, the filter is defective and must be replaced. headgear to reduce the distance to the filter. VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 9: Notes Before Commissioning
Contact your dealer. WARNUNG! If the material comes into contact with the user's skin, this could cause an allergic reaction on the skin Fig. 7: Magnifying lens under some circumstances. VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 10: Color Table (Recommended Shade Numbers)
The mechanical strength of the helmet can only be B: Medium impact energy (shelling 120 m/s); as strong as its weakest part. Inner lens: SWM F CE Low impact energy (45 m/s); SWM: Identification of manufacturer CE Mark VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 11: Care, Maintenance And Repair
- Use only original spare parts If the welding helmet does not function properly, contact a specialised dealer or our customer service. The con- tact details can be found in chapter 1.2 Customer ser- vice. VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 12: Disposal, Recycling Of Used Devices
(2) to the authorised de- aler or to the spare parts department and provide the following information: Automatic Welding Helmet Type of device: VarioProtect XXL-W-2 TC 1654025 Item number: Positin number: Drawing number: VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 13: Spare Parts Drawings
The following drawings should help you to identify necessary spare parts in case of service. If necessary, send a copy of the parts drawing with the marked components to your dealer. Spare parts drawing 1 Fig. 11: Spare parts drawing 1 Spare parts drawing 2 Fig. 12: Spare parts drawing 2 VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 14: Eu Declaration Of Conformity
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments Responsible for documentation: Kilian Stürmer, Stürmer Maschinen GmbH, Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt Hallstadt, 25.06.2020 ______________________ Kilian Stürmer Managing Director VarioProtect XXL-W-2 TC | Version 1.01 | EN... -
Page 15: Notes
Notes 17 Notes VarioProtect XXL-W-2 TC | Version 1.01 | EN... - Page 16 www.schweißkraft.de...
Need help?
Do you have a question about the VarioProtect XXL-W-2 TC and is the answer not in the manual?
Questions and answers