Table of Contents
Advertisement
3
Hardware configuration
3.1
Status LED
There is a red LED indicator on the zTrack Pro to inform you about specific events
during operation.
The LED positioned on the left bottom section of the device:
The LED illuminates only in one color, so the different events indicated with the number
of blinks:
Blink count
1 blink
2 blinks
4 blinks
While the device is charging via Qi charger, the LED lumination is inverted (LED is
constantly on while there is no event).
3.2
Battery and charging
The built-in LiPo battery can power the device for
around 2 weeks. Battery lifetime highly depends
on the device configuration.
The battery can be charged with any Qi-compliant
wireless charger. The device should be placed on
the charger with the "zTrack" logo facing upwards.
Charging takes approx. 1 hour. When the battery
is fully charged the LED goes off.
ZD0061-002
Revision: v1.0
Uplink message has been sent
Device wakes from idle mode (motion detected)
Downlink message accepted
Table 2. LED event description
Page 4 of 10
zTrack Pro User Guide
Event
Copyright ZANE systems Kft.
www.ztrackmap.com
www.zane.hu
Advertisement
Table of Contents
