Kebbe Attachment; Spritz Biscuit Attachment - Graef Fleischwolf FW 700 Instruction Manual

Kebbe attachment

• Place the worm in the worm housing.
• Place the former and subsequently the Kebbe attachment.
• Now screw on the ring nut.
• Incline the worm housing slightly to the right towards the drive. Turn the
worm housing counter-clockwise until the attachment locks into place.
• Insert the filling tray.
• Insert the plug into the socket.
• Press the on / off button.
• Put a plate or bowl below the outlet.
• Place the food to be processed into the filling tray.
• Turn on the control knob to the right. Here you have the choice between two
speed levels (low and high).
• Subsequently use the provided stuffer to push only.
• After finishing the mincing process, turn the control knob to "Standby".
• Subsequently switch the unit off.
• In order to disassemble the unit, press the release button, remove the attach-
ment; and disassemble all individual parts in reverse sequence.

Spritz biscuit attachment

• Take the requested perforated disc from the storage compartment.
• Place the worm in the worm housing.
• Subsequently place the blade.
• Place the requested perforated disc.
• Place the spritz biscuit attachment in the ring nut so that it rests front at the
opening.
• Now screw on the ring nut. Before screwing the ring nut tight, lock the spritz
biscuit attachment to short so that it is straight on the ring nut.
• Now fit the mould for the different spritz biscuit variations.
• Incline the worm housing slightly to the right towards the drive. Turn the
worm housing counter-clockwise until the attachment locks into place.
• Insert the filling tray.
• Insert the plug into the socket.
• Press the on / off button.
• Put a plate or bowl below the outlet.
• Place the dough to be processed into the filling tray.
• Turn on the control knob to the right. Here you have the choice between two
speed levels (low and high). We recommend the low speed level.
• Subsequently use the provided stuffer to push only.
26