Sausage Stuffing Attachment - Graef Fleischwolf FW 700 Instruction Manual

• Place the worm in the worm housing.
• Subsequently place the pre-cutting blade and the blade.
• Place the requested perforated disc.
• Now screw on the ring nut.
• Incline the worm housing slightly to the right towards the drive. Turn the
worm housing counter-clockwise until the attachment locks into place.
• Insert the filling tray.
• Insert the plug into the socket.
• Press the on / off button.
• Put a plate or bowl below the outlet.
• Place the food to be processed into the filling tray. Cut meat into strips of abt.
2.5 cm in width and abt. 6 cm in length.
• Turn on the control knob to the right. Here you have the choice between two
speed levels (low and high).
• Subsequently use the provided stuffer to push only.
• After finishing the mincing process, turn the control knob to "Standby".
• Subsequently switch the unit off.
• In order to mount the unit, press the release button, turn the attachment clock-
wise and remove; and disassemble all individual parts in reverse sequence.

Sausage stuffing attachment

• Place the worm in the worm housing.
• Place the support ring and subsequently the sausage stuffing attachment.
• Now screw on the ring nut.
• Incline the worm housing slightly to the right towards the drive. Turn the
worm housing counter-clockwise until the attachment locks into place.
• Insert the filling tray.
• Insert the plug into the socket.
• Press the on / off button.
• Put a plate or bowl below the outlet.
• Pull the artificial or natural sausage skin over the sausage stuffing attachment
nose.
• Place the food to be processed into the filling tray.
• Turn on the control knob to the right. Here you have the choice between two
speed levels (low and high).
• Subsequently use the provided stuffer to push only.
• After finishing the mincing process, turn the control knob to "Standby".
• Subsequently switch the unit off.
• In order to disassemble the unit, press the release button, remove the attach-
ment; and disassemble all individual parts in reverse sequence.
DE
EN
FR
IT
25