Assembling The Rollers - Clatronic RA 3735 Instruction Manual

• Ensure that a safety distance is maintained between the power
cord and the housing.
• Do not use the radiator in the open air.
• Do not use the radiator in the immediate surroundings of a bath-
tub, a shower or a swimming pool.
• The radiator should not be placed immediately below a socket-
outlet.
• The radiator should only be used in an upright position.
• If the radiator should fall over, first remove the plug from the
socket and allow the radiator to cool down before returning it to
an upright position.
• Do not repair the appliance by yourself. Always contact an au-
thorized technician. If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all packaging material such as plastic films, filler
material, cable ties and cardboard packaging.
3. Check the content for any missing parts.
4. In the event that the packaging content should be incom-
plete or if damages are noticeable, do not operate the
appliance. Return it to the dealer immediately.
Scope of Delivery
1 × Oil Radiator
2 × Roller support
2 × U-shaped bracket
2 × Wing nut
32
RA3735-3737_IM

Assembling the Rollers

CAUTION:
Before the appliance is used
for the first time the rollers
have to be attached.
NOTE:
It is best to place a blanket underneath so that the hous-
ing is not damaged.
Also refer to the image on page 3!
1. Turn the radiator upside down.
2. Place the U-shaped brackets between the first and sec-
ond and between the last and penultimate fin (1).
3. Insert the ends of the brackets through the holes in the
roller carriers (2).
4. Attach the brackets with the wing nuts.
08.04.19