Abode Harmonie AB1201 Manual

Abode Harmonie AB1201 Manual

Wall mounted basin/bath mixer

Advertisement

Harmonie Wall Mounted Basin/Bath Mixer
5 Year warranty
Terms and Conditions
In the unlikely event that you should experience any
defect in the materials or workmanship of your new
Abode tap within FIVE years of purchase, the
purchaser's sole remedy shall be the replacement
(at the manufacturer's discretion) of all or any part of
the product that is defective. All working parts and
valves are guaranteed for a period of FIVE years
from purchase. Decorative surface finishes and O-
rings are guaranteed for ONE year from the date of
purchase provided that our advice concerning care
has been observed and no scouring agents have
been used.
This is provided that the tap has been used for
normal domestic purposes in the UK and that the
care, installation and maintenance instructions have
been observed. The warranty extends to the original
purchaser only. You should retain a copy of your
dated invoice as proof of purchase to validate any
claims under this guarantee.
Marks, scuffs and scratches caused by improper
installation or accidental damage are not covered by
this guarantee. Neither are shade variations or any
Care Instructions for your Basin/Bath Mixer
To maintain the appearance of this tap, ensure that it is regularly cleaned only using a clean, soft damp cloth. A
solution of warm water and a mild liquid detergent may be used where necessary, and then the fitting rinsed
thoroughly and wiped dry. Any other cleaning action or cleaning products will invalidate your warranty.
If the product has a removable spout diffuser it can be unscrewed and cleaned periodically in warm water to maintain
flow.
Abrasive cleaners, scouring cleaners, limescale cleaners and acidic cleaners must not be used under any
circumstances. Avoid contact with all solvents (including chlorinated solvents, ketones or acetones as these may
result in surface deterioration or etching). Also avoid contact with any harsh household chemicals such as bleach
cleaners, drain cleaners, rust removers, paint strippers and toilet bowl cleaners, toothpaste, mouthwash, bar keepers
friend or Brasso.
Please leave these instructions for your customer.
damage or defect caused by incorrect installation or
abuse of the fitting.
As we are continuously improving and developing
our range of products, finishes & colours, in the
event of a valid claim, we may not be able to provide
an identical replacement for the defective product
throughout the guarantee period. Where an identical
product is no longer available, we will supply the
nearest equivalent from our then current product
range. In assessing your claim, we must be given
the opportunity to inspect the product as installed
prior to removal. Any product returns must be
packaged as received and complete.
No other warranties, express or implied, are made,
including merchantability or fitness for a particular
purpose. Under no circumstances shall the
manufacturer be liable for any loss or damage
arising from the purchase, use or inability to use this
product, or for any special, indirect, incidental or
consequential damages. No liability is accepted for
consequential damage to other household fixtures,
fittings or furnishings arising from this claim, even if
attached to the product. No installer, dealer, agent or
employee of Abode Home Products Limited has the
authority to modify the obligations or limitations of
this warranty.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Harmonie AB1201 and is the answer not in the manual?

Questions and answers

Summary of Contents for Abode Harmonie AB1201

  • Page 1 Abode tap within FIVE years of purchase, the throughout the guarantee period. Where an identical purchaser’s sole remedy shall be the replacement product is no longer available, we will supply the (at the manufacturer’s discretion) of all or any part of...
  • Page 2: Key Description

    Preparation All parts should be removed from their packaging and inspected for any transport damage and completeness prior to installation; you should read these instructions throughout before commencing installation. We do not accept responsibility for problems that may occur through improper installation. Always ensure you have sufficient hot and cold water pressure available to allow correct function before specifying or installing this product.
  • Page 3 Fix elbow (D) or inlet pipes (F) securely to the wall using appropriate fixings (G). Note these fixings should be secure enough to support the attached product weight (A) safely during use. Before installing this new connection, it is essential that you thoroughly flush through the supply •...
  • Page 4 Decide on a suitable position for the mixer where all users can operate. Determine the route for the incoming Hot (J1), Cold (J1) and Outlet (J3). *Note: Connectors (J1, J2 & J3) are not included. The product can be fitted as both a basin mixer and a bath filler so the connectors should be chosen to suit this.
  • Page 5: After Installation

    After installation Once you have visually checked the installation of the new tap and all connections, ensure that all other fittings are closed except the tap which should be left open. Turn on your water heating system and ensure that your mains stopcock is open. Reconnect both the hot and cold water supplies to this fitting.
  • Page 6: Important Technical Data

    Manufacturers Product Reference AB1201 ©Abode 06/2020 Abode Home Products Limited, Unit L, Zenith Park, Whaley Road, Barnsley, S75 1HT. Tel: 01226 283434 Fax: 01226 282434 www.abode.eu All errors and omissions excepted.

Table of Contents