OCTAGON HEAVY - DUTY FIRE PIT RIM
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.
No.
Parts
A Panel
B Bolt
C Nut
ASSEMBLY
Phillips screwdriver required for assembly, not included.
DO NOT FULLY TIGHTEN THE NUTS & BOLTS BEFORE ASSEMBLING THE ENTIRE RIM.
1. Align Panels (A) with the overhanging edge of the first panel on the outside on the second panel.
2. Connect the panels by hand-tightening 2x Bolt (B) and 2x Nut (C).
3. Repeat Steps 1 & 2 until all panels are connected.
4. Tighten all hardware using a Phillips screwdriver (not included).
OFPRHD37
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at
NB-OFPRHD37
• Do not discard packaging until all parts are accounted for.
Qty.
• Assemble on a soft, clean surface to avoid scratching or damaging the finish.
8
• Keep children away during assembly. This item contains small parts that can
16
be swallowed by children.
16
• Children should always be under direct adult supervision around this product.
B
C
/
/
Order/Customer Reference Number:
09/2019
www.SerenityHealth.com/contact-us/
Page 1 / 2
Need help?
Do you have a question about the NB-OFPRHD37 and is the answer not in the manual?
Questions and answers