Z Automotive Tazer JL Mini User Manual

Z Automotive Tazer JL Mini User Manual

For jeep wrangler jl; jeep gladiator jt

Advertisement

The
Tazer JL Mini
device for the following vehicles:
2018-2020 Jeep Wrangler JL
2020 Jeep Gladiator JT

Firmware Updates

The Tazer may not ship with the latest
firmware, so use
Programming
Utility), also on the website,
to install the firmware over USB.
User's Guide
For Firmware
is an electronic plug-in
New firmware
is available
periodically,
always free
and posted
to the Z
Automotive
website.
ZPU (Z Automotive
11.2.1-042320

Contents

Non-Menu Live Functions
Troubleshooting
Also compatible with
Jeep Gladiator JT
2
2
3
4
5
6
7
7
7
8
10
11
13
13
14
1

Advertisement

Table of Contents
loading

Summary of Contents for Z Automotive Tazer JL Mini

  • Page 1 Also compatible with Jeep Gladiator JT User’s Guide For Firmware 11.2.1-042320 Tazer JL Mini is an electronic plug-in Contents device for the following vehicles: Feature List • Vehicle Settings 2018-2020 Jeep Wrangler JL • Live Functions 2020 Jeep Gladiator JT...
  • Page 2 • Vehicle Settings are changes made to the Jeep such as tire size, gear ratios or settings which accomodate other upgrades. These changes will continue to operate after the Tazer JL Mini is unplugged. • Live Functions are operations the Tazer JL Mini performs live, only while it is physically connected. Vehicle Settings •...
  • Page 3 • one-touch return-to-stock – quick • enable automatic headlights “Unmarry” function returns to stock. Live Functions • AutoStopStart Disable – Tazer JL Mini will responders/off-road visibility – controlled automatically remember the last state of from key fob or steering wheel buttons the auto stop/start system and set it for –...
  • Page 4 Installation Installation is a matter of unplugging the • The Tazer JL Mini is intended to be left SGW module above the OBD2 diagnostic plugged in, as many of its features (Live connector and plugging the Tazer JL Mini Functions) only work when installed.
  • Page 5 Vehicle Settings This section explains how to use the Tazer JL Mini to change the vehicle settings for feature activation. Menu Navigation items. To change/select a setting, • For all functions involving the dash press and hold LEFT ARROW and tap (EVIC) display, the EVIC screen first the Cruise “ON/OFF”...
  • Page 6 “Marry” the Tazer JL Mini full 2.5 minutes for the Tazer JL Mini to to the vehicle. When you select this reboot all systems – the Uconnect will...
  • Page 7 Submenu Tire: TPMS and tire size options • Set TPMS: Turn the tire pressure to raise or lower the pressure, then monitoring system on or off. select it to save the new setting. (The • Set Tire Pressures Front/Rear: Change car’s computer will only recognize a the TPMS warning pressures –...
  • Page 8 • Set Front Axle Disconnect: This bar, and once it’s disconnected, enter the setting will delete the factory Front Axle Tazer JL Mini JL settings menu and set Disconnect for those that have done axle the Sway Bar off. It’ll remain disconnected swaps.
  • Page 9 • Firmware Version Display: Shows the current Tazer JL Mini firmware revision. • Serial Number Display: Shows your Tazer JL Mini’s serial number for (only needed in specific tech support situations) • Unmarry Key: Displays the current one-time use Unmarry Key.
  • Page 10 Live Menu Settings This section explains how to use the Tazer JL Mini’s live functions – these are activated with the same button presses as the Settings Menu, but while the engine is RUNNING. These features will only work if the Tazer JL Mini remains plugged in.
  • Page 11 Non-Menu Live Settings Some live functions of the Tazer JL Mini are not accessed via a menu, but rather work automatically or with button presses. • Light Shows: The Tazer comes pre- to the next show. Exit the menu configured with 6 light shows out of the (left arrow and CANC) to turn off the box, plus 3 “make your own”...
  • Page 12 Remap section for full locker control burnout. “LineLock” will be displayed in • Cooldown Mode: With the ignition on but the cluster. engine not running, press the right arrow • Rock Crawl (patent pending): Press and and cruise cancel button at the same hold the left arrow and cruise set(- time to turn the engine fan on High.
  • Page 13 Cooldown lockers. Front/Rear/Front+Rear Lockers • Partial Reboot: Press left arrow and SwayKill cruise RES with the ignition set to RUN Keep in mind that not all functions and engine is not running, and the Tazer pertain to all vehicles. These remap will reset several systems including buttons will only program and operate the PCM (engine adaptives), RF Hub,...
  • Page 14 Z Automotive cannot be held responsible misuse or consequential damages. If you are in doubt, email support@zautotech.com. Please be aware that modifying your vehicle in any way can affect your vehicle’s warranty, longevity, handling, etc.

Table of Contents