Windows Nt 4.0 Driver Installation; Configuring The Windows Nt 4.0 Driver - QDI Vision-1 User Manual

Windows NT 4.0 Driver Installation

Once Windows NT 4.0 has been installed on your system, follow the
procedure listed below to install the Microsoft Windows NT 4.0 display
driver.
1.
Right click on the Windows NT desktop area
and select Properties.
2.
At the top of the dialog box, click on the Settings tab.
3.
At the bottom of the Settings display screen, click on the
Display Type button.
4.
Click on the Change button in the Adapter Type box.
5.
In the Change Display screen, click on the Have Disk
button.
6.
Insert the CD-ROM Driver disk into the CD-ROM drive,
click Browse to select
the CD-ROM drive letter, click OK, and follow the
prompt to complete the installation.
To configure the Windows NT 4.0 driver, follow the procedure listed in
the next section.

Configuring the Windows NT 4.0 Driver

To configure your Windows NT 4.0 driver once it is installed, follow the
procedure listed below.
1.
Right click on the Windows NT desktop area and select
Properties.
2.
From the Display Properties dialog box, you can change
your driver and monitor configurations. Click on the
Settings tab, located at the top of the dialog box, and
adjust the settings using the drop-down boxes and slider
D:\NT40DRV\
Display Drivers Installation 26
, where D: is