QDI Vision-1 User Manual page 19

H
ardware Installation
Follow the detailed procedures described in this section for easy
installation of VISION-1 Graphic card into your computer system. A
screwdriver is the only tool needed for installation.
Note!
Before installing the VISION-1 AGP card, touch a metal
surface of your computer to discharge yourself of static charge,
hold the graphic card by the edges and do not touch the IC chips,
leads or circuits.
1.
Before opening the computer cover , be sure that the
power to the computer system unit and all devices
connected to it are turned off. Disconnect the computer
from the power supply.
2.
In a typical PC computer all cover mounting screws are
located on the back of the computer. Remove these screws
User's Manual 17