Eastern Tabletop 2800 Instruction Manual page 17

STEP 11
x 3
Screw M5 X 12
x 3
Fixing Bracket
11-1. Insert the mesh (11) on the top plate. Align the holes to the
holes of top plate.
11-2. Secure the mesh on the top plate with 3pcs M5X12 screws
and 3pcs fixing brackets (20).
STEP 12
x 3
Wing nut
x 6
Small flat
washer Φ8
x 3
Stud
12-1. Install the reflector(9) with 3pcs studs (18),
lean the heater carefully and attach the 3pcs small
flat washer Φ8(19) on top of the heater.
12-2. Put washer on each stud and fasten the
reflector with another washer and wing nut (17).
Return the heater carefully to upright position.
11
20
- 13 -
17
19
9
18