Advertisement
NME–3
Mechanical Parts Assembly Instructions
rotate into snaps
Type Label
Level 4
Operation: (in Order)
1. Assemble SIM Guidance to Bottom Enclosure by jig.
2. Add the sealing label
3. Assembling Top Enclosure ( assemble ribs on inside of Top Enclosure to the 3
recesses marked above. Rotate Top Enclosure until it snaps on the other side).
Add the type label making sure that the label lies in the recess area.)
Level 5
To check:
existence of Data Cover
to put RU in plastic bag
Page 12
Technical Documentation
Top Enclosure Assy
Sealing Label
3 recesses
SIM Guidance
Data Cover
PAMS
assemble ribs
Issue 1 10/99
Advertisement
