Electric Operation Panel; Start, Stop And Brake For Vertical And Horizontal Spindle - Sharp VH3 Mill Operations Manual & Parts List

3-2 Electric operation panel (Fig. 8)
(1) Operation ready button
(2) Tapping and milling function switch
(3) Emergency stop button
(4) Horizontal spindle start button
(5) Horizontal spindle stop button
(6) Vertical spindle start button
(7) Vertical spindle stop button
(8) Table feed motor start button
(9) Cutting oil pump switch
(10) Spindle brake switch
(11) Table feed motor stop button

3-3 Start, stop and brake for vertical and horizontal spindle

Steps to rotate the spindle: Push the horizontal spindle button (Fig. 8 (4)) or vertical
spindle button (Fig.8 (6)) and the horizontal or vertical motor will start. Steps to stop the
motor of vertical or horizontal spindle. Push the horizontal spindle stop button (Fig.8 (5))or
vertical spindle stop button (Fig.8 (7)). And the rotating spindle will gradually slow down
and stop. If turning spindle brake switch (Fig.8 (10)) to right then the spindle will stop
immediately.
Chung Sing 11 VERSION: 2