Xvive U5 Manual page 21

T1
T2
S MODE
S (stereo) mode combines two audio inputs by panning
them sharp left and right when they are sent to the
camera's mic input. The T1 signal will be sent to the
camera from the receiver's left output channel. Audio
source T2 will send its audio on the right channel.
Adjusting the T1 and T2 output volumes will change
their respective output volumes(L/R) independently. This
method allows the signals to be balanced/mixed as
desired during the editing/mixing stage.
RECEIVER OUTPUT MODE
T1
L
R T2
M MODE
M (mono) mode mixes the T1 and T2 audio signals and
sends the same audio signal to L and R output channel.
You can set the left and right output volumes separately,
but you can't change the level blend once the video is
recorded. However, although the L and R signals are
identical, the audio can be panned so that one side is
louder and the other is a quieter (-6dB, for example)
"safe" option.
L
R
20