Getting Started; Battery Removal And Installation - LeapFrog Fun-2-3 Instant Camera Parents' Manual

GETTING STARTED

BATTERY REMOVAL AND INSTALLATION

1. Make sure the unit is turned Off.
2. Locate the battery cover on the bottom of the unit and use a
3. Remove old batteries by pulling up on one end of each
4. Install 2 new AAA (AM-4/LR03) batteries following the
5. Replace the battery cover and tighten the screw to secure.
612203 manual REV.indd 4 612203 manual REV.indd 4
screwdriver to loosen the screw and then open the battery cover.
battery.
diagram inside the battery box.
4
09/30/2020 09:32:00 09/30/2020 09:32:00