Hitron CODA4589 Instruction Manual page 6

HOW TO SET UP YOUR GATEWAY:
Follow these steps to connect your new gateway, the all-in-one device that
allows you to utilize both wired and wireless (WiFi) devices.
1 Locate cable wall outlet (coaxial) in a central location. It will look like this:
2
Connect coaxial cable from the wall to gateway
Connect power cord from gateway to the wall outlet
3
on, which could last around 10 minutes. Once lights are glowing steady, it's ready to use.
If you're connecting a wired device, use the Ethernet cord provided to connect the gateway to
4
the back of the device
Note: If you're connecting Atlantic Broadband phone service, use the phone cord to connect your phone to the gateway
have more than one phone, or devices that use a phone line (i.e. credit card machine, fax machine, etc.), you will need to plug the
phone line from the modem into an unused phone jack on the premises to feed dial tone for all devices.
.
(insert into connector and turn barrel to tighten).
. The gateway will update once powered
. If you