Advertisement
6 Overview of Application Settings
PCR2 can run in one of 3 operation modes.
-
Timespan : Count people and send counter values after the Interval
-
NotZero :
-
Trigger :
7 Change Uplink Interval
8 Over-the-air configuration
Most of the settings can be changed by sending a LoRaWAN downlink to port 190.
Find more information on this in our Knowledge Base:
Count poeple and send if counter values are >0
Movement detection mode
https://parametric.ch/kb
www.parametric.ch/products/pcr2-in
Advertisement
