Advertisement
fig.2
Socket Head
Cap Screw &
Washer
(70) (62)
Transporter Base Frame
(inverted)
5. OPERATION
5.1
Lifting A Drum
5.1.1. Close the valve (fig.4) fully clockwise. Foot pump to elevate the fulcrum assembly lower jaw marginally below the drum rim external lip
(fig.1).
5.1.2. Move the drum loader to bring the support frame yoke into contact with the drum (fig.1). Engage the top jaw with the drum rim inside
diameter; this may require lowering the jaws slightly to obtain the fullest register.
Warning! Ensure that the drum is as low as possible for transporting, elevating only if required at the destination. Ensure there
are no obstacles enroute and the surface is suitable to take the weight of the fully laden drum.
5.1.3. Ensure that the drum rim is engaged with the fulcrum assembly jaws (fig.1). With both hands on the handle bars, foot pump to raise the
drum clear of the ground.
5.1.4. Use the handle bars (fig.4) to push, pull and steer the drum loader.
5.2.
Lowering A Drum
5.2.1. To lower the drum slowly, turn the release valve anticlockwise in a controlled manner until the drum is standing firmly on the ground.
5.2.2. Release the fulcrum assembly jaws by lifting the top jaw from the drum rim manually and pull the drum loader away from the drum.
6. MAINTENANCE
6.1.
Regularly check the drum loader chassis for rigidity including the integrity of the castors.
6.2.
Regularly check the fulcrum assembly for wear. Replace worn jaws which may cause poor rim grip.
6.3.
Regularly check the linkages and pins for wear or missing retaining split pins which could cause lifting failure.
6.4.
Keep the column guides lubricated with grease as supplied. DO NOT contaminate the steering handles with grease.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
M8
fig.5
Fulcrum Jaws
01284 703534
Original Language Version
M8
M12
fig.3
Handlebars
Column c/w
Hydraulics,
Fulcrum & Drum
Support Frame
Transporter
Base Frame
sales@sealey.co.uk
'A'
Viewed On
Arrow 'A'
www.sealey.co.uk
DH03.V2
Issue No: 2 (HF) - 12/07/18
fig.4
Socket
Set
Screw
(43)
Advertisement
