Table of Contents
Advertisement
Quick Links
Using your SCORPION Z9PC alarm controller
PIN numbers (user codes)
SCORPION has 8 variable length 4 digit pin numbers, All of these numbers may be selectively programmed to arm
and disarm the system.
The keypad beeper
SCORPION annunciates conditions through the keypad beeper. During an arming cycle the beeper will sound for
the entire exit time. This is a "leave now" warning. On entry, the beeper sounds for the programmed entry period.
SCORPION will alarm at the expiry of this period. If a valid code is entered to disarm the system, the beeper emits
two short tones. An incorrect entry is annunciated as one long tone.
The status (yellow) lamp
The yellow status lamps are used to indicate several conditions:
Status lamp (S 1) on, Area A is arming or armed
Status lamp (S 1) off, Area A is disarmed
Status lamp (S 1) flashing, an alarm has occurred in area 1, or a system fault exists.
Status lamp (S 2) on, Area B is arming or armed
Status lamp (S 2) off, Area B is disarmed
Status lamp (S 2) flashing, an alarm has occurred in area 2, or a system fault exists.
PANIC or Two key panic
If this function has been programmed into SCORPION it may be activated by pressing * and # simultaneously.
A panic activation may be cancelled by entering any valid user code.
Single button Arming:
Press: 1 then # to arm Scorpion
In PARTITION mode press:
1 then # for area 'A'
2 then # for area 'B'
(this is a technician selectable option. Ask your installation technicians advice).
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Micron SCORPION Z9PC
Summary of Contents for Micron SCORPION Z9PC
- Page 1 Using your SCORPION Z9PC alarm controller PIN numbers (user codes) SCORPION has 8 variable length 4 digit pin numbers, All of these numbers may be selectively programmed to arm and disarm the system. The keypad beeper SCORPION annunciates conditions through the keypad beeper. During an arming cycle the beeper will sound for the entire exit time.
- Page 2 To ARM the system press: A valid USER CODE then # If all zones are clear the keypad emits a short 2 beep tone and the yellow status lamp turns on. The lamps for all zones to be armed are also turned on. Flashing lamps are accompanied by a long 2-beep tone and indicate that one or more zones are not secure.
- Page 3 NITEWATCH ARMING STATION. (Optional) Zones selected as night arming zones may be armed / disarmed from a nitewatch arming station (optional extra). Nitewatch is simple even for very young children to use. To ARM or DISARM nitewatch press: The single top key. If the area is secure, NITEWATCH emits two beeps and lights the 'ARMED' lamp.
- Page 4 [*+#] Two key panic alarm (any keypad). In program mode Scorpion steps the edit location backwards 1. IMPORTANT: This alarm system must be tested annually to maintain system integrity. © Copyright 1998 | Micron Group Holdings Limited | New Zealand...
Need help?
Do you have a question about the SCORPION Z9PC and is the answer not in the manual?
Questions and answers