Advertisement
Quick Links
Advertisement
Related Manuals for Screen Excellence REFERENCE
Summary of Contents for Screen Excellence REFERENCE
- Page 1 REFERENCE Fixed Frame Projection Screen ASSEMBLY INSTRUCTIONS...
- Page 2 17. Gloves – Quantity 1 pair You will also need the following items: Tape measure, spirit level, sharp scissors, screws and wall plugs for fixing to wall. The following diagram shows the parts with their corresponding item numbers. Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 3 The following pictures shows the parts with their corresponding item numbers. A – for screens 100” and over B – for screens 96” and less For screens over 200” we increase quantity of horizontal profiles to 6 and prolongators to 4. Copyright Screen Excellence Ltd. 2017, Version 2.0...
-
Page 4: Assembly Advice
(item 6) can be changed by loosening the retaining screws and sliding the brackets to the required position. Use wall plugs of suitable size and strength for the screen. Ø Minimum distance of wall bracket from edge of frame should be more than 100 mm. Copyright Screen Excellence Ltd. 2017, Version 2.0... - Page 5 Place all profiles on the protective sheet. The black velvet side must be face down. 2. If you install screen with size under 100” go to page 6 • Slide other ½ horizontal frame (make sure all pins are in the right position) • Tighten all screws Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 6 Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 7 For screens over 180” Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 8 It will apply in most cases • 4 snap-in brackets: this is a fixing solution to install the screen in a recessed place where it cannot be lifted to be hanged Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 9 Place each one of the brackets in the corresponding contour line and draw a mark for each hole • Fix the two bottom brackets to the wall • Hook the frame onto the wall to check position Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 10 If you use the clipping snap-in brackets: 8. Remove the frame from the wall Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 11 It is safer to perceive the insertion position by simply inserting the tool once in the profile without the fabric. Then remove it, place the fabric over the profile and insert it inside. Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 12 In case of a problem, release locally the fabric from the profile, and insert it again. 11. Insert the Black Backing fabric the same way in the same groove as the Enlightor fabric. Stretch it evenly. Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 13 If you have only snap-in brackets (when a vertical displacement is not possible), then insert the 4 wall bracket pi-grips into the screen groove by pushing it until it clips on the 4 brackets. Copyright Screen Excellence Ltd. 2017, Version 2.0...
- Page 14 Contact: Screen Exellence Ltd. Unit 136 Bentwaters Parks Rendlesham Suffolk England IP12 2TW www.screenexcellence.com sales@screenexcellence.com Telephone: +44 1394 420 220 Fax: +44 1394 420 203 twitter.com/ScreenExcel Copyright Screen Excellence Ltd. 2017, Version 2.0...
Need help?
Do you have a question about the REFERENCE and is the answer not in the manual?
Questions and answers