Advertisement
Interconnect Sync Instructions
Every order containing 2 or more breakout boards will include a free
interconnect sync cable
to chain each breakout board together.
The cable is approximately 19 inches long.
The ZSX, along with the previous generation of breakout boards, have two 4-pin input ports; you can sync any amount of power
supplies together by connecting the 4-pin port to the next breakout board's 4-pin port and so on. We have tested up to 20 linked PSUs.
By syncing the power supplies, you will be able to power on/off all power supplies in the chain by pressing the power button on any
one of the breakout boards in the chain. In the event that one power supply gives out and is no longer working, the sync will not be
interrupted; all working power supplies will still power on/off together.
Further, the interconnect sync cables facilitate the use of our optional
Remote Management Module
for all connected PSUs.
Watch some of the older features in action here:
https://www.youtube.com/embed/KYPKXVuHFWc
We are still working on a new video to best showcase all of the new features.
Parallel Miner's ZSX Breakout Board Manual |Revised Jan 2021
3
Advertisement
