ATTO Technology FastStream SC 5300 Installation Manual page 3

Set up Phone Home E-mail notification of
system problems. Refer to the Installation and
Operation Manual for more information.
9 The Health and Status Monitor page appears.
PC users: install ATTO Express Power Center
N ote
For 6-drive configurations, skip to
page 3.
1 Open the Power Center folder on your setup
CD.
2 Click on the ExpressPCI x86.msi file
3 Follow the installation instructions.
4 Reboot the computer.
5 After the reboot, double click on the Express
Power Center Utility shortcut on your desktop
to start the program.
6 Press the Insert key on your keyboard and
enter the name of the RAID group you want to
create.
7 Press OK.
N ote
If you are using a single bus configuration, you
must create two RAID groups.
© 2007 ATTO Technology Inc. PRMA 000-0365-000
PC users: continue to
Express Power Center
Mac® users: continue to
ATTO
8 Click on the Members pane.
Step 14 on
9 Press Insert on your keyboard.
10 Enter 128 KB in the Stripe Interleave text box.
11 If you have a split bus configuration, select both
RAID drives attached to your ATTO
FastStream SC 5300.
If you have a single bus configuration with 12
300GB drives or 24 drives, select
• First RAID group:
Channel 0 ID 0 LUN 0
Channel 1 ID 0 LUN 0
• Second RAID group:
12 Click the disk icon in the upper left hand corner
of the program to save the configuration.
13 Close the Express Power Center application.
14 On the desktop, right click on My Computer
15 Choose Manage.
16 The Computer Management screen appears.
Click on Disk Management.
..............................................................................
PC Users: Install ATTO
Mac users: install
ExpressStripe.
Channel 0 ID 0 LUN 1
Channel 1 ID 0 LUN 1
3