LG 55EG9600 Training page 6

55EG9600 IN-START "Power Off Status" Details (2 of 3)
POWER_OFF_BY_NO_POLLING
POWER_OFF_BY_OFF_TIMER
POWER_OFF_BY_OLED_AM_MODE
POWER_OFF_BY_OLED_COMP_FAIL
POWER_OFF_BY_ON_TIMER
POWER_OFF_BY_ONRF_FAIL
POWER_OFF_BY_OVERHEATING
POWER_OFF_BY_PLLFAIL
POWER_OFF_BY_PNWASHDONE
POWER_OFF_BY_PNWASHFAIL
POWER_OFF_BY_PNWASHSTART
POWER_OFF_BY_POWER_BD_PROTECT
POWER_OFF_BY_POWERONLY
POWER_OFF_BY_POWERSOUND
POWER_OFF_BY_QUICK_START
POWER_OFF_BY_REMOTE_KEY
POWER_OFF_BY_REMOTE_KEY2
POWER_OFF_BY_REQUEST_RESET
POWER_OFF_BY_RESET
POWER_OFF_BY_RESUME_FAIL
POWER_OFF_BY_RS232C
POWER_OFF_BY_SIG_DETECT
POWER_OFF_BY_SLEEP_TIMER
POWER_OFF_BY_SWDOWN
POWER_OFF_BY_TEMPERATURE_SENSOR_ERROR
POWER_OFF_BY_VERIFY_FAIL
POWER_OFF_BY_VSOVP
POWER_OFF_BY_VSUVP
POWER_OFF_BY_WARMCHECK
POWER_OFF_BY_WEAVE
November 2018
MODE
Power off when receiving no reply from a sub-micom
RESULT: TV power off/on (Reboot)
CONDITION: There is no I2C response from CPU for 15 seconds.
Power off by Off timer
If the module cable is disconnected in W7 model, the micom is force power off TV.
A failure has been reported to the Micom from the OLED display or Compensation was interupted.
(All OLED webOS Before webOS 3.5)
Power off by On timer
Power off when no remote and local key input for 2 hours after power on by On timer.
RESULT: Reboot
CONDITION: OLED module compensation is running but fails.
power off by overheating (for OLED model)
RESULT: Micom triggers TV power off/on (reboot), due to Micro stops working.
CONDITION: When power on, there is no reply from the Micro. This can be caused by a sub-Micom.
Power off by panel noise wash function complited. (OLED after webOS 3.0)
Power off by panel noise wash function fail case. (OLED after webOS 3.0)
Power off for starting OLED panel noise function in warm state. (OLED after webOS 3.0)
RESULT: Micom triggers TV power off (for power board safety)
CONDITION: when power board gets overloaded.
Request reset by p-only remote key. (condition: DC On)
Power off by power off sound function. (When Accessibility, TV Power Sound turned On)
Power off by reboot to suspend function.
When the user turns off the TV, reboot the TV with QSM+ as needed.
Power off by remote key
RESULT: Micom force TV power off within 1 second.
Power off by request reset
CONDITION 1: Run 'Initialization' through Smart TV setting
CONDITION 2: Run 'App initialization'.
CONDITION 3: Reset is required for Instart setting is changed.
Power off by Micom Reset
CONDITION 1: Run 'Initialization' through Smart TV setting
CONDITION 2: Run 'App initialization'.
CONDITION 3: Reset is required for In-Start setting is changed.
Power off by resume fail when dc on case.
If occur the resume fail, TV will be rebooted.
Power off by RS232C command
Signal command
Power off by sleep timer
Power off by software download
power off by temperature sensor error (OLED and HECTO)
RESULT: System shut down.
CONDITION: verification for LG application fails.
VS Over Voltage Protect (PDP Only)
VS Under Voltage Protect (PDP Only)
Power off by warm check thread.
It's normal case. When DC on with warm condition, main SoC run the warm check thread.
If the SoC has nothing to do, TV is power off by warmcheck.
Power off by IOT device.
Contents
Page 05
55EG9600 (2015) In-Start Menu
Action
Main, IR, WiFi
None
None
Panel, Main, SW
None
Panel
Installation / Panel
Main, IR, WiFi
None
Panel / SW
None
SMPS, Main
None
None
None
None
IR, Keys
None
None
None
None
None
None
None
Installation / Fan
Main
SMPS, Y, Z
SMPS, Y, Z
Main
External
LG