Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BÜHLMANN Quantum Blue
Summary of Contents for BÜHLMANN Quantum Blue
- Page 1 Quantum Blue Reader ® User Manual...
- Page 2 The information contained in this document is subject to change without notice. Trademarks Trademarks and labels used in this document are property of their respective owners. Copyright Information Quantum Blue Reader User Manual ® Document Version: V12 02/2021 © Copyright 2021 by BÜHLMANN Laboratories AG Printed in Switzerland...
-
Page 3: Table Of Contents
Contents Contents Introduction General Intended Use Main Features of the Quantum Blue Reader ® Safety Information Proper Use Electrical Safety Hazardous Substances Infectious Substances Waste Disposal Maintenance Cleaning and Decontamination Symbols on the Quantum Blue ® Reader General Description Hardware... - Page 4 Unpacking 4.1.7 Connecting Accessories (optional) Language Setting 4.2.1 Overview 4.2.2 Installation Procedure Operation of the Quantum Blue ® Reader Basic Functions Start Manual Operation and Initialization of the Reader Main Menu Scan Test Mode 5.4.1 Select and enter Test Parameters 5.4.2...
- Page 5 8.1.3 Storage Conditions 8.1.4 Dimensions and Weight Shipment Instructions Warranty and Customer Services Warranty Obligations of the User Appendix Waste Electrical and Electronic Equipment (WEEE) Declaration of Conformity Reader User Manual V12 02/2021 Page 5 of 43 Quantum Blue ®...
-
Page 6: Introduction
Intended Use The intended use of the Quantum Blue ® Reader is to analyze colorimetric tests by reflectometry. The fast and precise scanning allows the detection of quantitative results depending on the rapid test and/or the configuration of the device. -
Page 7: Main Features Of The Quantum Blue ® Reader
Introduction Main Features of the Quantum Blue Reader ® Precision: Excellent repeatability, long term stability of the detector (optical system), and the powerful controller enable reliable quantification of lateral flow tests. High sensitivity: The award winning confocal sensor used ... -
Page 8: Safety Information
Safety Information Safety Information This manual contains information about warnings and cautions that must be followed by the user to ensure safe operation of the Quantum Blue ® Reader and to maintain the Quantum Blue ® Reader in a safe condition. -
Page 9: Proper Use
Safety Information Proper Use CAUTION Improper use of the Quantum Blue Reader may ® cause personal injuries or damage to the instrument. The Quantum Blue Reader must only be operated ® by qualified personnel who have been appropriately trained. Servicing of the Quantum Blue ®... -
Page 10: Electrical Safety
+40˚C, let it stand overnight at proper operating conditions before turning it on. CAUTION Metal surfaces can interfere with RFID reader function. Electrical Safety CAUTION Do not expose the Quantum Blue ® Reader to strong electromagnetic radiation. CAUTION Use the specified AA rechargeable batteries only! -
Page 11: Infectious Substances
The user is responsible for carrying out appropriate decontamination of the instrument (according to instructions provided under service and maintenance, cleaning section, chapter 6.4) if hazardous materials are spilled on or inside the test cassette holder. Reader User Manual V12 02/2021 Page 11 of 43 Quantum Blue ®... - Page 12 BÜHLMANN Laboratories AG representative or with the BÜHLMANN Laboratories AG Customer Support to ensure that the equipment will not be damaged. Reader User Manual V12 02/2021 Page 12 of 43 Quantum Blue ®...
-
Page 13: Symbols On The Quantum Blue ® Reader
Safety Information Symbols on the Quantum Blue ® Reader Symbol Location Description Type plate on CE mark for Europe the back of the instrument Type plate on In vitro diagnostic (IVD) the back of the medical device instrument Type plate on... -
Page 14: General Description
UP button FORWARD button DOWN button BACK button ENTER and ON/OFF button Display Test cassette holder (Drawer) with Calibration Spot Battery compartment Position for placement of RFID Chip Card Reader User Manual V12 02/2021 Page 14 of 43 Quantum Blue ®... -
Page 15: Software
RFID reader (all optional) USB port for PC-connection Power port Software QB Soft software for running and controlling the Quantum Blue ® Reader, reading test results, printing test results, up/downloading test results, managing test methods and user rights via PC. -
Page 16: Installation Requirements Site
(holder) can cause serious interference with the measurement and must be avoided. 4.1.2 Environment If you plan to use the Quantum Blue Reader in a working environment ® prone to dirt build-up, you will need to clean the device regularly. For cleaning, use a damp cloth. -
Page 17: Ambient Temperature
Avoid storage of the Quantum Blue ® Reader at low (-20 °C) or high (+50°C) temperatures. 4.1.4 Power Requirements With an external power supply, the Quantum Blue ® Reader operates at 100–240 V , 0.5 A, and 50–60 Hz. The Quantum Blue ®... -
Page 18: Language Setting
Reader is English. The language can be changed by choosing one of the language updaters on the CD-ROM. Please note that only ONE language can be displayed at a time on the firmware of the Quantum Blue Reader (refer to chapter 4.2.2 ®... -
Page 19: Operation Of The Quantum Blue Reader
® Basic Functions Key pad with buttons Press ENTER button (5) for 2 seconds to turn on the Quantum Blue ® Reader (see chapter 5.2). Select on the upper right part on any screen in order to go back to the main menu using the buttons (1), (2), (3) and/or (4). -
Page 20: Start Manual Operation And Initialization Of The Reader
Manual Operation Start Manual Operation and Initialization of the Reader To turn ON the Quantum Blue Reader press the ENTER button (5) for 2 ® seconds. After turning on the reader the self test, V 2.2.18 the detector check, the initialization of Welcome…... -
Page 21: Scan Test Mode
Manual Operation Scan Test Mode After turning on, the Quantum Blue Reader switches automatically to the ® “Test Selection” screen (see chapter 5.4.1) and is ready for the measurement of a test cassette. If “Method” and “Lot ID” correspond with... -
Page 22: Select And Enter Test Parameters
B 15:23:12 01.02.21 automatic incubation time was selected (e.g. “CAL_0”). The incubation timer can be cancelled by pressing the ENTER button (5). Reader User Manual V12 02/2021 Page 22 of 43 Quantum Blue ®... -
Page 23: Viewing Results
Exporting raw data as an Excel file is possible via PC using QB Soft software (please refer to Quantum Blue® Reader QB Soft user manual). Memory Mode Detailed test data and test results can be viewed in the memory mode. - Page 24 Run No. Run No.: total number of runs made Test Result 123 µg/g with this reader B 15:23:12 01.02.21 Test Result: displayed result (concen- tration of analyte measured) Reader User Manual V12 02/2021 Page 24 of 43 Quantum Blue ®...
- Page 25 “200 mV” the test cassette was inserted incorrectly, must be turned by180° and scanned again. Reader User Manual V12 02/2021 Page 25 of 43 Quantum Blue ®...
-
Page 26: Setup / Info Mode
Setup / Info Mode Some system parameters such as date, time, data transfer mode, etc can be set and changed in the setup menu (2 screens, p. 1/4 and p. 2/4). Information about the Quantum Blue ® Reader device and firmware version can be found on screen p. - Page 27 01.02.21 “Keyboard”, “None” Keyboard Signal: set on/off This Quantum Blue ® Reader contains an internal RFID reader (therefore, default setting is “Rfid_intern”). An external RFID reader (“Rfid_extern”) can also be used, whereby the data transfer with a barcode reader (“Barcode”) or via key pad (“Keyboard”) is not supported by the current firmware version 2.2.18.
-
Page 28: Calibration Check Mode
Manual Operation Calibration Check Mode Each time the Quantum Blue Reader is turned on, an automatic ® calibration check is made during initialization of the reader. A manual calibration check can be performed at each time during the reader operation in the calibration check mode. -
Page 29: Maintenance
Maintenance Maintenance This section is intended for qualified users who have had maintenance training. The instructions should provide the user with the necessary information for proper maintenance and care of the Quantum Blue ® Reader. Replacing the Batteries To replace batteries: Open the cap of the battery compartment (no. 8 in chapter 3.1) with a flat tool (e.g. -
Page 30: Charging The Batteries
Reader is a highly sensitive optical device for quantitative measurements. If the reader displays “NotOK” even after several calibration measurements and cleaning of the calibration spot (see no. 7a in chapter 3.1), the Quantum Blue Reader requires a ® recalibration. In this case please contact your local BÜHLMANN Laboratories AG representative or the BÜHLMANN Laboratories AG... -
Page 31: Cleaning
Mechanical movements during measurement. Cleaning If you use the Quantum Blue Reader in a working area that is subject to ® high levels of dirt, you should clean the reader regularly. Use a damp cloth to clean the device. If the dirt is persistent, you can also rub the surface of the device with a cloth that has been moistened with a mild detergent or a 70% alcohol solution (isopropanol or ethanol). -
Page 32: Troubleshooting
If any malfunctions should occur during operation, please check the possible causes using the following table. For any further questions please contact your local BÜHLMANN Laboratories AG representative or the BÜHLMANN Laboratories AG Customer Support. The display remains blank after turning on the Quantum Blue Problem A ® Reader. - Page 33 Troubleshooting Date and time are incorrect after turning on the Quantum Blue Problem C ® Reader. Date/Time did not get Re-enter date and time in Cause C1 Solution C1 saved. the “Setup/Info” mode (see chapter 5.6). The internal backup battery...
- Page 34 Chip Card for the same product and lot from your local BÜHLMANN Laboratories AG representative RFID Chip Card is not read correctly and/or the Quantum Blue Problem G ® Reader displays an error message (e.g. „Error RFID -2105” or “Error RFID -10706”).
- Page 35 Card for a respective test correct information for the “Test Method” to be respective test “Test measured. Method” to be measured. The Quantum Blue Switch the Quantum Blue ® ® Cause G4 Solution G4 Reader displays an error Reader off, hold the RFID...
- Page 36 Troubleshooting The Quantum Blue Reader is blocked or displays an error Problem H ® message on any page. Battery power is low or Switch off the Quantum Cause H1 Solution H1 batteries are empty. Blue ® Reader, plug in the external power supply and turn on the reader again.
-
Page 37: Technical Data
8.1.1 Operating Conditions External Power Supply Input: 100 – 240V , 0.5A, 50 – 60Hz Output: 12V , 1.25A Quantum Blue ® Reader Nominal input: 12V , 1.25A Batteries 3x 1.2V AA Ni-MH rechargeable batteries (see chapter 6.1 for details) RFID reader frequency 13.56 MHz... -
Page 38: Storage Conditions
Width: 178 mm Depth: 165 mm Weight Approx. 620 g Shipment Instructions The transportation case containing the Quantum Blue reader device has ® to be placed in a shipping container/ delivery box for shipment. CAUTION Do not ship the Quantum Blue ®... -
Page 39: Warranty And Customer Services
BÜHLMANN Laboratories AG may require return of the defective products to BÜHLMANN Laboratories AG for repair (rework or replacement) at the expense and option of BÜHLMANN Laboratories AG. Reader User Manual V12 02/2021 Page 39 of 43 Quantum Blue ®... -
Page 40: Obligations Of The User
Reader User Manual V12 02/2021 Page 40 of 43 Quantum Blue ®... -
Page 41: Appendix
BÜHLMANN Laboratories AG either to request follow-up information for scheduling collection of the electronic waste or to provide you with an individual quote. Reader User Manual V12 02/2021 Page 41 of 43 Quantum Blue ®... -
Page 42: Declaration Of Conformity
Declaration of Conformity Declaration of Conformity Reader User Manual V12 02/2021 Page 42 of 43 Quantum Blue ®... - Page 43 +41 61 487 12 12 Fax orders +41 61 487 12 99 support@buhlmannlabs.ch www.buhlmannlabs.ch BÜHLMANN products are subject to the quality standards within the quality management system according to ISO 13485. Reader User Manual V12 02/2021 Page 43 of 43 Quantum Blue ®...
Need help?
Do you have a question about the Quantum Blue and is the answer not in the manual?
Questions and answers