Outdoor Essentials RUSTIC ELEVATED GARDEN PLANTER Assembly Instructions

Outdoor Essentials RUSTIC ELEVATED GARDEN PLANTER Assembly Instructions

Advertisement

RUSTIC ELEVATED GARDEN PLANTER –
STEP 5
ASSEMBLE THE FLOOR
• Drop in the floor boards with notches (G) into the
spaces that butt up against the legs as shown.
• Insert the straight floor boards (H) to complete
the floor.
STEP 6
INSERT LANDSCAPE LINERS
• Insert landscape liner in bed before adding soil.
You will need approximately 9 cubic feet of soil
to fill the 2x6 planter and 12 cubic feet of soil to fill
the 2x8 planter.
Note: If planting consumables,
an impermeable liner is required
(sold separately). Punch holes in
bottom for draining.
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION
OR USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH
THE CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE
PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES
NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
©2020 UFP Retail Solutions, LLC. Outdoor Essentials is a registered trademark of UFP Industries, Inc.
All rights reserved. 2801 E. Beltline NE, Grand Rapids, MI 49525
OutdoorEssentialProducts.com
ASSEMBLY INSTRUCTIONS
Note: Boards will have small gaps in
between them to allow for drainage.
H
11340_9/20
• •
Kit Contents
A
6 – Legs
G
x3
B
3 – Short boards (no cleat)
C
2 – Long boards (no cleat)
D
2 – Long boards with cleat
E
2 – Short end boards with cleat
x24
F
1 – Short middle board with two cleats
G
3 – Notched floor boards
H
24 – Straight floor boards
I
48 – Screws
Tools Needed
• Power drill with #2 Phillips bit
(recommended) or a screwdriver
• Work gloves
• Landscape Liner
(included with some styles)
PARTS DIAGRAM
C
D
H
A
B
E
Pg. 4
RUSTIC ELEVATED GARDEN PLANTER
ASSEMBLY INSTRUCTIONS - For 2x6 and 2x8 styles
B
F
C
A
D
A
B
G
E
A
I
Pg. 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RUSTIC ELEVATED GARDEN PLANTER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Outdoor Essentials RUSTIC ELEVATED GARDEN PLANTER

  • Page 1 PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES. ©2020 UFP Retail Solutions, LLC. Outdoor Essentials is a registered trademark of UFP Industries, Inc. Pg. 1 All rights reserved.
  • Page 2 RUSTIC ELEVATED GARDEN PLANTER – RUSTIC ELEVATED GARDEN PLANTER – ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 1 ASSEMBLE THE TWO ENDS STEP 3B ASSEMBLE THE SIDES CONTINUED flush • Place one short board (B) and one short end board • Carefully flip the table over.

Table of Contents