Download Print this page
Axxess AX-DSPX-HD2-WR Installation Instructions Manual

Axxess AX-DSPX-HD2-WR Installation Instructions Manual

Harley davidson dsp package with water resistant enclosure 2014-up

Advertisement

Quick Links

INTERFACE COMPONENTS
• AX-DSP-X circuit board
• AX-DSPX-HD2-WR harness (with gaskets)
• AX-DSPX-HD2-WR enclosure
• Case
• Cap (with O-ring)
AxxessInterfaces.com
Harley Davidson DSP
Package with Water
2014-up
Resistant Enclosure
INTERFACE FEATURES
• Water resistant plug-n-play harness for the AX-DSP-X
• AX-DSP-X included
• Water resistant enclosure with zip tie mounts included
• Amplifier, if equipped, does not need to be retained
• All wiring will be done at the radio location
• Micro-B USB updatable
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
AX-DSPX-HD2-WR
I N S T A L L A T I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections ............................................................2
Installation ......................................................... 3-4
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
Product Info
REV. 8/16/19 INSTAX-DSPX-HD2-WR

Advertisement

loading

Summary of Contents for Axxess AX-DSPX-HD2-WR

  • Page 1 • Amplifier, if equipped, does not need to be retained • All wiring will be done at the radio location • Micro-B USB updatable INTERFACE COMPONENTS • AX-DSP-X circuit board • AX-DSPX-HD2-WR harness (with gaskets) Product Info • AX-DSPX-HD2-WR enclosure • Case • Cap (with O-ring) AxxessInterfaces.com...
  • Page 2 Case White / Front Left + Green / Rear Left + White/Black / Front Left - Green/Black / Rear Left - AX-DSPX-HD2-WR Gray / Front Right + Purple / Rear Right + Circuit Board Gray/Black Front Right - Purple/Black / Rear Right -...
  • Page 3 6. Slide the assembly into the case, then click it shut. Zip-tie the enclosure to a secure Harness location in the fairing to secure it. Make sure the Axxess logo is facing up to further ensure that no outside elements can enter the enclosure.
  • Page 4 10. Connect the amp turn-on wire from the AX-DSPX-HD2-WR harness. 11. Click the Identify button to confirm that the AX-DSPX-HD2-WR is connected properly. If so, a chime will be heard from the front left speaker. Test all functions of the installation for proper operation.
  • Page 5 REV. 8/16/2019 INSTAX-DSPX-HD2-WR...
  • Page 7 REV. 8/16/2019 INSTAX-DSPX-HD2-WR...
  • Page 8 AX-DSPX-HD2-WR I N S T A L L A T I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com...