Page 1
Aries 390 “paladin” u s e r ` s g u i d e Important Export Restrictions! Commodities, prod- ucts, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S. Government and they fall under the control jurisdiction of either the US Department of State or the US BIS-Department of Commerce.
• Dimensions: 275 mm x 108 mm x 83.5 mm /10.8” x 4.3” x 3.3” • Weight: 1.45 kg /3.2 lbs * ATN reserves the right to change the above specifications at any time without notice prepArAtion For operAtion Before getting started make sure to follow these steps: •...
NOTE: Receptor attachment screws may need to be tightened after continuous shooting. MountinG sYsteM The ATN Night Vision Riflescopes Mounting System allows to change the position of the rif- lescope flexibly on the weapon in relation to a shooter in combination with the fixed positions already available on the weaver rail.
Page 5
For installation of the IR illuminator onto the riflescope use the picatinny rail of the scope. The IR illuminator control buttons are located on its side. To switch the Digital IR illuminator o n / o f f p r e s s “...
You may need to clean the eyepiece of the riflescope from time to time in order to guarantee top performance. When you receive your riflescope you should check for dust on the eyepiece of the unit. First you will need to remove the eyepiece. To do that you will need to initially loosen the fixing screw that can be found on the base.
ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;...