Advertisement
Quick Links
Advertisement
Related Manuals for T4W 59475
Summary of Contents for T4W 59475
- Page 1 OPERATION MANUAL Puller Prod. no 59475...
-
Page 2: Table Of Contents
Parts list ..................3 Description ..................4 Work area ..................4 Personal safety ................4 Connection schema..............6 Operation ..................6 Maintenance.................. 7... -
Page 3: Parts List
Parts list Handle screw Handle (c/w check valve) Filter O-ring Handle support Screw cap Handle extension support Handle extension Slide hammer support 10 Slide hammer 11 Slide hammer cover 12 Cover 13 Suction pad 125mm 14 Suction pad 100mm 15 Suction pad 75mm 16 O-ring 17 Hook support 18 Hook... -
Page 4: Description
WARNING! Read and understand all instructions before using this product. The operator must follow basic precautions to reduce the risk of personal injury and / or damage to the product. Before allowing someone else to use this product, make sure they are aware of all safety information. - Page 5 protection. Protect your hands with suitable gloves. Wear a full face shield if your work creates metal filings or wood chips. Protect your head from falling objects by wearing a hard hat. Wear an ANSI approved dust mask or respirator when working around metal, wood and chemical dusts and mists.
-
Page 6: Connection Schema
Connection schema. 2 3 4 Air Hose Filter Regulator Lubricator Cupler and (optional) Plug Operation • Ensure that the panel to be worked on is dry, clean and free of grease. • Select the appropriate size suction cup and screw it onto the slide hammer and remove the protective cover from the cup. -
Page 7: Maintenance
• When finished, turn the air valve off and remove the puller from the body panel. • Disconnect from the air supply, remove the suction cup from the puller and refit the protective cover. Place all parts back in the case and store it in a safe, dry, childproof location. •... - Page 8 Thoma +48 95 741 11 62 Tel./Fax: info@t4w.eu • www.t4w.eu...