DO NOT EXCEED 90psi. Constant air supply may vary depending on compressor size and capabilities. Always make sure tank and air lines are free from oil and water contamination. Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
T parts of the gun) Turn liquid valve to the horizontal position after use to release the air inside. Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Page 6
Spare parts of the tool itself will be affected if using acidic or alkaline liquid. Do not press snow cup during usage; it will cause spare parts damaged and endanger the operator. Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Turn liquid valve to the horizontal position when pausing. Tighten the gun assembly by the jar and lid to avoid stripping of the threads. Work in well ventilated areas, do not use in closed environment. Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Page 8
Machinery Directive EN 50144-2-7:2003 and with national implementing legislation. 20.08.2013, Międzyrzecz, Poland Tomasz Konopa, Chairman Date and location Signature/ Full name in typing & position Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...