Sony KD-43X7 F Series Service Manual page 70

2018/05/04 04:12:02 (GMT+09:00)
3.12 HDMI No Picture
3.12.6 HDMI Bravia Sync (CEC) Not function
[OK] Source Support CEC &
CEC Source function Normally
[OK] CEC Setting On
[NG] CEC not functioning
[OK] Connector no abnormality
[OK] R4031 ≈ 100Ω ±5%
Bravia Sync (CEC)
Not Function
[NG] Source Not Support CEC /
CEC Source not function Normally
Confirm Source (Player)
CEC Condition/Capability
[NG] CEC not functioning
[NG] CEC setting Off
Bravia Sync
(CEC) TV setting
[NG] CEC not functioning
Factory Reset & [OK] CEC functioning
Change Proven OK
HDMI cable
[NG] Connector abnormal
Physical
appearance Check On
HDMI connector
[NG] CEC not functioning
[NG] R4031 ≠ 100Ω
Check impedance
Of R4015 Resistor
during AC OFF
[NG] CEC not functioning
TV Business Division
Checking condition:
- TV ON & HDMI Source ON except if the flow mentioned is AC OFF.
- TV HDMI input connected to HDMI source (Player etc.)
- TV Input Selection: HDMI
Change to CEC
Compatible source
[OK] CEC functioning
Turn TV Bravia Sync
[OK] CEC functioning
HDMI Connector Broken.
Replace & Re-verify
[OK] CEC functioning
Resistor Broken.
Replace & Re-verify
Replace B-Board
And Re-verify
70
[OK] CEC functioning
END
(Supplementary
70
information)
SYS SET