Sec 1. Disassembly/Part Number Information - Sony XBR-52LX905 Service Manual

SEC 1. DISASSEMBLY/PART NUMBER INFORMATION

1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
A Remove 4 screws from Table-Top Stand Assembly
B Lift up TV set to detach from Table-Top Stand Assembly
C Gently place the TV set face down onto a soft cloth
C
XBR-52LX905/60LX905
A
B
Soft Cloth
Components not identifi ed by a part number or The component parts of an assembly are indicated by the
description are not stocked because they are seldom reference numbers in the far right column of the parts list
required for routine service. and within the dotted lines of the diagram.
NOTE: The components identifi ed by shading
and mark are critical for safety. Replace only
!
with part number specifi ed.
5
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
1 X-2546-089-2 BASE (LL1) ASSEMBLY
(XBR-52LX905 ONLY)
1 X-2546-090-3 BASE (LLL1) ASSEMBLY
(XBR-60LX905 ONLY)
2 4-170-475-01 COVER, NECK (LL1 FRONT)
(XBR-52LX905 ONLY)
2 4-170-476-01 COVER, NECK (LLL3A FRONT)
(XBR-60LX905 ONLY)
3 4-170-482-01 COVER, NECK (LL1 REAR)
(XBR-52LX905 ONLY)
3 4-170-488-01 COVER, NECK (LLL3A REAR)
(XBR-60LX905 ONLY)
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: The components identifi ed by a red outline and a
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1
2
4
3
REF. NO. PART NO. DESCRIPTION
4 4-170-446-01 NECK (LL1)
(XBR-52LX905 ONLY)
4 4-170-452-01 NECK (LLL3A)
(XBR-60LX905 ONLY)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
mark contain
[ASSEMBLY INCLUDES]
12