Advertisement
4.3
Attach the front and rear frame together using the smaller side
braces with the double tabs, insert at the top and bottom of the
frames (fig.3A). Ensure again they are the correct way up and
that the locking castors are at the front.
4.4
Between the two uprights Install the centre braces (single tab)
half way up the frames. see fig.3B.
4.5
tPs36 only - As well as the side braces attach front
and rear beam (single tab) exactly half way up the frame, front
and back (fig.3B).
fig.3
iMPortant! if you are going to join 2 x tPs22 to make tPs44 or
2 x tPs36 to make tPs72 you should at this point refer to the
instructions supplied with the joining kit - Model no. tPsJK
4.6
Insert the remaining cross beams in the frame using fig.4 and
fig.5 to space them out correctly. Ensure the beams are the
correct way around to hold the wire shelves (fig.4, fig.5). As
before use a soft faced mallet to tap the beams into place.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPortant: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inForMation: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey Limited
4.7 starting at the bottom place the wire shelves into the frame
ensuring the shelves for the larger bins are at the bottom and the
shelves for the smaller bins are at the top. Place the flat wire
shelf on the top.
the storage system is now ready to use.
fig.4
fig.7
sole UK Distributor, sealey group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7Ar
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
tPs22, tPs36
fig.5
fig.6
Issue: 2 - 28/06/12
Advertisement
