SSS Siedle BB-1 Model
SSS Siedle BB-1 Model

SSS Siedle BB-1 Model

Battery burnisher

Advertisement

Quick Links

BATTERY BURNISHER
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell
all operators to read the book. If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.
For additional information refer to the Triple S website
www.triple-s.com or write to:
Triple S
2 Executive Park Drive
Billerica, MA 01862
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately
with the delivering carrier.
MODEL
BB-1
OPERATING & MAINTENANCE
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Triple S
reserves the right to make changes or improvements to its
machines without notice.
FOR YOUR CONVENIENCE, RECORD THIS
IMPORTANT INFORMATION:
INSTRUCTIONS
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER ________________________
DATE PURCHASED ____________________

Advertisement

Table of Contents
loading

Summary of Contents for SSS Siedle BB-1

  • Page 1 BATTERY BURNISHER MODEL BB-1 OPERATING & MAINTENANCE INTRODUCTION INSTRUCTIONS READ THIS BOOK This operator’s book has important information for the use The contents of this manual are based on the latest product and safe operation of this machine. Read this book care- information available at the time of publication.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS MACHINE! WARNING: To reduce the risk of fire, electric shock or injury: 1. You must have training in the operation of the machine before using it. READ THE INSTRUCTION BOOK.
  • Page 3: Operating Procedures

    OPERATING PROCEDURES WARNING! For the safe operation of this machine PAD INSTALLATION follow the instructions given in this booklet and the For Burnishing: Select the correct clean floor pad (your training given by your supervisor. Failure to do so can supplier can help you).
  • Page 4: Preventive Maintenance

    MAINTENANCE PREVENTIVE MAINTENANCE REPLACING THE FUSE 1. Move the Toggle Switch to the OFF position. The green WARNING! Always move the Toggle Switch to the OFF light should be off. position before performing any service, maintenance, 2. Lift and remove the Upper Hood Cover. pad changing or inspection of the machine.
  • Page 5 UNDER HOOD ELECTRICAL CONNECTIONS 36 VOLT SYSTEM...
  • Page 6 BB-1 Battery Burnisher...
  • Page 7 BB-1 PARTS LIST Item Part Number Description Qty. Item Part Number Description Qty. 864201 Lower Body Housing 962182 5/16-24x 1 HH Bolt 911290 Battery Condition Meter 962129 5/16-18x 5/8 HH Bolt 911291 RPM Meter W506D 5/16-18x 3/4 HH Bolt 911292...
  • Page 8 SSS BATTERY BURNISHER, MODEL BB-1 LIMITED WARRANTY The SSS Battery Burnisher, Model BB-1 has been manufactured, tested and inspected in accordance with specific engineering requirements, and is WARRANTED by the manufacturer to be free from defects in workmanship and materials.

Table of Contents