Download Print this page
SSS Siedle ACHIEVER 80 Operating & Maintenance Instructions
SSS Siedle ACHIEVER 80 Operating & Maintenance Instructions

SSS Siedle ACHIEVER 80 Operating & Maintenance Instructions

Self-contained carpet extractor

Advertisement

Quick Links

Self-Contained Carpet Extractor
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell
all operators to read the book. If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.
For additional information refer to the Triple S website
www.triple-s.com or write to:
Triple S
2 Executive Park Drive
Billerica, MA 01862
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately
with the delivering carrier.
ACHIEVER 80
ACHIEVER 110
READ THIS BOOK
OPERATING & MAINTENANCE
INSTRUCTIONS
The contents of this manual are based on the latest product
information available at the time of publication. Triple S
reserves the right to make changes or improvements to its
machines without notice.
FOR YOUR CONVENIENCE, RECORD THIS
IMPORTANT INFORMATION:
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER ________________________
DATE PURCHASED ____________________

Advertisement

loading
Need help?

Need help?

Do you have a question about the ACHIEVER 80 and is the answer not in the manual?

Questions and answers

Summary of Contents for SSS Siedle ACHIEVER 80

  • Page 1 Self-Contained Carpet Extractor ACHIEVER 80 ACHIEVER 110 OPERATING & MAINTENANCE INTRODUCTION INSTRUCTIONS READ THIS BOOK This operator’s book has important information for the use The contents of this manual are based on the latest product and safe operation of this machine. Read this book care- information available at the time of publication.
  • Page 2 A wand with external vacuum and solution hoses are not necessary with your ACHIEVER machine, but available. The ACHIEVER 80/110 has a 100 psi solution pump and a four (4)jet spraying system located on the bottom side of the ma- chine to apply solution to the carpet.
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1. You must have training in the operation of this machine before using it. 2.
  • Page 4: Prestart-Up Checks

    PRESTART-UP CHECKS Check the inlet strainer for damage or debris. It is ACHIEVER 80/110 machines are very simple and easy to located at the bottom of the fresh water tank. Holes in operate. Very little maintenance and service are required to the screen can allow contaminants to enter the pump keep your machine in top operating condition.
  • Page 5: Operating Procedures

    OPERATING PROCEDURES Pull backward during operation. DO NOT AT- The ACHIEVER 80/110 machines are the most “user friendly” self-contained extractors available. The following TEMPT TO OPERATE IN A FORWARD DIREC- procedures are intended to describe and detail proper opera- TION. Position yourself behind the machine, grasp the handle and gently lift up on the actuator bar.
  • Page 6 SERVICING ACHIEVER self-contained extractors are designed and manufactured to provide years of trouble free service with a minimum of maintenance and service. The following recommendations are intended to assist the operator and Service Technician in performing routine maintenance. Failure to follow these recommendations can result in damage to your machine and diminished performance. Warning: Always unplug your machine before performing any service.
  • Page 7: Wiring Diagram

    Vacuum Blower Replacement: a) Remove the dome top and carefully turn the ma- g) Then remove the three (3) bolts that hold the bracket chine upside down. for the blower. Remove the bracket. b) Remove the two hex bolts at the base of the black h) Release the blower from the bracket by removing the panel on the back of machine.
  • Page 8 TANK & BLOWER...
  • Page 9 TANK & BLOWER ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. 208662 Recovery Tank 110 W317D Screw #4-40 x 1-1/4” PHP MS SS 208661 Recovery Tank 80 3703 Switch - Momentary W191D1 Screw #10-24 x 3/4 RHP SS W307D Washer #4 Ext Tooth 217201...
  • Page 10 WATER CARRYING AND BRUSH CHASSIS...
  • Page 11 WATER CARRYING AND BRUSH CHASSIS Achiever 80 & 110 ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. S626P Strainer 211501 Jet Cap W166D Brass: Jam Nut W205D Screw #8-32 x 1” Nylon M/S S372P Washer: Nylon A13445 Rectifier 211310 90°...
  • Page 12 This warranty is, however, subject to the following qualifications, conditions and limitations which are set forth to provide you and all users of the SSS Achiever 80 & 110 with information concerning the duration, extent, availability and applicability of this Limited Warranty, the procedure to be taken to obtain its performance and other information concerning the manufacturer’s warranty policy.

This manual is also suitable for:

Achiever 110