Table of Contents
Advertisement
Optical Drive
Inserting an optical disc
1. While the Notebook PC's power is ON, press
the drive's eject button and the tray will eject
out partially.
3. Hold the disc by the edge and face the disc's
printed side up. Push down on both sides of
the disc's center until the disc snaps onto the
hub. The hub should be higher than the disc
when correctly mounted.
NOTE: It is normal to hear as well as feel the CD spinning with great intensity in the
CD drive while data is read.
Using the Notebook PC
2. Gently pull on the drive's front panel and slide the
tray completely out. Be careful not to touch the
CD drive lens and other mechanisms. Make sure
there are no obstructions that may get jammed un-
der the drive's tray.
4. Slowly push the drive's tray back in. The drive will
begin reading the table of contents (TOC) on the
disc. When the drive stops, the disc is ready to be
used.
4
39
Advertisement
Table of Contents
