Inserting a PC Card (PCMCIA)
Be sure the PC card is
level when inserting.
1. If there is a PC Card socket protector, remove it
using the "Removing a PC Card" instructions
below.
2. Insert the PC card with the connector side first
and label side up. Standard PC cards will be
flush with the Notebook PC when fully inserted.
Removing a PC Card (PCMCIA)
To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.
4
1. Press in the toggle eject button and release. The
recessed spring loaded toggle button will ex-
tend when pushed in and released.
1
3
Using the Notebook PC
3. Carefully connect any cables or adapters
needed by the PC card. Usually connectors can
only be inserted in one orientation. Look for a
sticker, icon, or marking on one side of the con-
nector representing the top side.
2. Press the extended button again to eject the PC
Card. Carefully pull the ejected PC card out of
the socket.
4
2
5
39