Dover Hydro FM-800 User Manual

Safety Precautions

WARNING! P
lease read these warnings carefully and follow all applicable local codes and regulations.
TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE:
P
rotective clothing and eyewear when dispensing chemicals or other materials, when working in the vicinity
WEAR
of chemicals, and when filling or emptying equipment.
R
ead and follow all safety instructions in safety data sheets (SDS) for all chemicals.
O
bserve all safety and handling instructions of chemical manufacturer.
D
ilute and dispense chemicals in accordance with chemical manufacturer's instructions.
ALWAYS
D
irect discharge away from you and other persons and into approved containers.
R
egularly inspect equipment and keep equipment clean and properly maintained.
U
se a locally approved back-flow prevention device - not provided - as required for safe, legal operation.
M
ix incompatible chemicals that pose hazards.
NEVER
O
nly to water tap outlets at 0.2 MPa / 1.7 Bar / 25 PSI Min., 0.6 MPa / 6 Bar / 85 PSI Max. and maximum
ATTACH
water temperature 60°C / 140°F. Operating outside of these parameters will void manufacturer's warranty.
I
t is recommended to flush with a dedicated COLD water supply only, when possible.
NOTE
introduction

Package Contents

HYD00-03608-01XT (2-port Add-on)
• FM-800 2 port Add-on Assembly
• Hardware Kit
• 3/8" Braided Tubing (2-foot section for each Port)
THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS!
user manual
FM-8OO (2 Port Add-on)
• Coupler (1/2" x 1/2" Male Pipe Tapered, "Hex Nipple")
• Mounting Bracket
2 port add-on
remove discharge barb
hex nipple
bracket