Secondary Master (Sub-Menus); Ultra Dma Mode - Asus S1B Hardware User Manual

Notebook pc

Hide thumbs Also See for S1B:

Table of Contents

This field auto detects Ultra DMA capability (for improved transfer speeds and data integrity) for compatible

IDE (Integrated Disk Electronics) devices. Set to Disable to suppress Ultra DMA capability. NOTE: To

make changes to this field, the Type field must be set to User Type HDD. The configuration options are: [0]

[1] [2] [3] [4] [5] [Disabled]. The following is for your reference:

Mode 2 = ATA/33 = 33MB/s; Mode 4 = ATA/66 = 66MB/s; Mode 6 = ATA/100 = 100MB/s

NOTE: After using the legend keys to make your selections on this sub-menu, press the

[Esc] key to exit back to the Main menu. When the Main menu appears, you will notice

that the drive size appears in the field for the hard disk drive that you just configured.

Secondary Master (sub-menus)

This field is used to configure the secondary IDE drive installed in the system. To configure a hard disk

drive, select this sub-menu from the Main menu and press the Enter key to enter this sub-menu.

The fields and options on this sub-menu are the same as the previous menu described earlier. Leave on

the default setting of Auto.

Type

NOTE: The Secondary drive displayed here is for example only. The actual display will

be dependent on the drive you have installed in your Notebook PC.

After using the legend keys to make your selections in this sub-menu, press the [Esc]

key to return to the Main menu.

Primary Slave

[Auto]

Configuring the BIOS

Item Specific Help

<Enter> to select the

type of the IDE drive.

[User Type HDD] allows

you to set each entry on

your own.

Table of Contents

S1a