Erone SETDS39433-E2 User Manual

ERONE DS433
06 7 8
R A D I O C O M A N D I
Thank you for choosing a product Erone.You are
recommended to read carefully this manual before using
the product.
1 - DESCRIPTION
The radiocontrol ERONE DS433 has been designed for the
control of automatic closing systems and anti-burglar
systems. The operating frequency is among the European
harmonised frequencies; the product fully complies with
the European Regulations 89/336/CEE, 73/23/CEE ,
99/05/CE. The receiver which makes the activation, once
received the transmitter code, has to be connected during
the installation to the device to control ( gate, garage door,
rolling shutters, awnings, anti-burglar appliances, lighting
). The transmitter security code is obtained by means of a 9
ways three-state dip-switch which allows up to 19683 code
combinations. All the receivers of the range Erone DS433
can store into the EEPROM the code of many transmitters.
Each transmitter ( or its different keys ) can be stored into
different receivers and hence can do more functions.
In order to use the unused keys of the transmitter it is
enough to connect the dedicated receiver to the
mechanism to drive ( i.e. electrolock of a pedestrian gate, a
buzzer, etc. ) and proceede to store the keys on its memory.
2 - TECHNICAL SPECIFICATIONS
Number of keys :
Supply :
Battery duration: from 12 to 24 months
Battery type:
Current consumption :
Operating frequency :
Security code combinations number:
Modulation:
E.r.p. :
Range in open space :
Operating temperature : from -10 °C to +55 °C
Dimensions :
Weight :
3 - EXTERNAL CHARACTERISTICS
RED LED
BUTTON 1
CHANNEL A
SETDS39433-E2
SETDS39433-E4
4 - MODEL TYPES
2 buttons transmitter : Cod. SETDS39433E2
4 buttons transmitter : Cod. SETDS39433E4
5 - CODING
Open the rotating door to access to the battery and the
dip-switches.The dip-position will give the security code.
Warning: Each transmitter is provided with the same code
set on the dip-switches; it highly advisable to change this
code by moving the dip-switches on the favourite position
( "+", "0" , "-").
6 - TRANSMITTER CODES MEMORISATION
The transmitter code has to be stored into the receiver
memory. The memorisation can be done by selflearning.
The instructions for this operation are reported on the
receiver installation manual. Your own installer will
perform this operation during the installation or will give
2 or 4 you the necessaries explications during the selling.
Don't forget that the still free buttons of your transmitter
12 Vdc
can be used for further wireless fuctions.
23A Ask your installer the best suitable receiver.
25 mA
433.92 MHz
19683
AM/ASK
50 - 100 uW
from 100 to 200 m
83 x 48 x 16 mm
40 g
RED LED
BUTTON 2
CHANNEL B
BUTTON 4
CHANNEL D
BATTERY
BUTTON 3
DOOR
CHANNEL C
7 - BATTERY AND DIP-SWITCH ACCESS
8 - TROUBLESHOOTING
FAULT
The radio signal is not
verifiable
Replace the transmitter
The transmitter led
doesn't switch on
Check the power supply
The radio signal is not
verifiable
The transmitter led
Replace the transmitter
switches on
For further informations, please, visit the
internet site www.erone.com
GUARANTEE
The guarantee period of all Erone products is 24
months, beginning from the manufacturer date.
During this period, if the product does not work
correctly, due to a defective component, the product
will be repaired or substituted at the discretion of
the producer. The guarantee does not cover the
plastic container integrity. After-sale service is
supplied at the producer's factory.
ERONE is a trademark by ELPRO INNOTEK S.r.l.
Via Piave, 23 - I-31020 S.Pietro di Feletto (TV)
ITALY
Tel.: +39/0438/450879 - Fax.: +39/0438/457126
Toll-free number: 800.53.46.46
E-Mail: info@erone.com
Web: www.erone.com
SOLUTION
battery
of the receiver
battery