Table of Contents
Advertisement
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
It is easy to set up Windows. Please refer to your Microsoft Windows 98 Installation Guide to install Windows 98
Operation System.
Note :
Regarding CD-ROM driver in Windows 98, you should use Windows 98's CD-ROM driver
instead of the DOS real-mode CD-ROM driver. A DOS driver has worse performance and
wastes memory, also may cause problems. You can remove the DOS real-mode CD-ROM
driver by doing the following:
1. Remove the "Device=<cdrom>.SYS ..." line in C:\CONFIG.SYS file. (The driver filename
depends on which driver you installed).
2. Remove the "MSCDEX ..." line in C:\AUTOEXEC.BAT file.
Of course, you will need the DOS driver if you start the installation from a blank HDD. You
need this driver to access the Windows 98 CD or our driver CD. That is the reason you need
the CD-ROM's DOS driver during the installation of Windows 98.
16
M
W
ICROSOFT
98 E
INDOWS
NVIRONMENT
Advertisement
Table of Contents
