2019/04/19 01:55:00 (GMT+09:00)
CUC data transfer (OLED only)
In "Panel/PQ" service mode
1.
a.
Go to
b.
To select
To change data , press "←" or "→" on remote commander.
c.
"WB/Mura/CUC data transfer"
"WB/Mura/CUC data
TV Business Division
Please apply BM3 board or panel is replaced.
category by "↑" or "↓".
transfer", press → button.
2. In "WB/Mura/CUC data transfer"
a. Select
"CUC data
remote commander .
b. To change the items, press "←" or "→" on remote
commander and press "Enter" button.
Choose
▪ 1. T-con to SoC
and press "Enter" button.
c. "Mura data transfer" is also displayed on the menu, but
Mura function does not work on OLED model. Please skip
this item by pressing "↓" on remote commander .
d. Select "[start]" and press "Enter" button to start transfer.
89
transfer" by pressing "↑" or "↓" on
(Supplementary information)
89
SYS SET