Preparing Your Notebook Pc - Asus L5D Hardware User Manual

Preparing your Notebook PC

These are only quick instructions for using your Notebook PC. Read the later pages for detailed infor-
mation on using your Notebook PC.
1. Install the battery pack
(1) Lift the two tabs to remove the battery
compartment cover.
2. Connect the AC Power Adapter
1. Connect this end of the power cord to the
AC-DC converter.
2. Plug the "AC Power Cord" into an electrical
outlet (110V - 240V).
3. Insert the DC Power Plug.
3. Open the Display Panel
(1) Slide the display release latch, (2) lift the
display panel with one hand while holding the
system portion with your other hand.
Introducing the Notebook PC
(2) Insert the battery pack with the front side first
and push it down until it is flat. Replace the cover.
(2)
(1)
(3)
4. Turn ON the Notebook PC
Press the power button and release. In Windows
XP, this button can also be used to safely turn OFF
the Notebook PC.
1
13