Download Print this page
Smith's Heating First Sterling 3 EL Installation & User Manual

Smith's Heating First Sterling 3 EL Installation & User Manual

High level fan heater

Advertisement

Quick Links

MODEL
The STR3EL is a quiet High Level Fan Heater
designed for Commercial and Industrial
situations. It is suitable for wall mounting.
The Heater incorporates a tangential flow fan
and the unit is designed to operate in free air
conditions. It is important that there should
be no restriction to the free flow of air
through the unit.
Safety & Care
The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.
Versatile, energy efficient heating
Sterling 3 kW Electric
Model: Sterling 3 EL
INSTALLATION & USER GUIDE
PLEASE RETAIN THIS LEAFLET FOR FUTURE MAINTENANCE
WARNING
•Do NOT site the appliance in a corner.
•Do NOT handle the appliance with wet
hands.
•Do NOT use the appliance in workshops or
rooms where excessive dust is generated or
present.
•Ensure that nothing is pushed into any
aperture of this appliance.
•Do NOT touch outlet grille when the
appliance is in use.
•Do NOT cover or restrict any aperture of the
appliance when in use.
•Do NOT use the appliance if damaged.
•Do NOT leave the appliance unattended
•where young children are present.
9102020 iss2

Advertisement

loading

Summary of Contents for Smith's Heating First Sterling 3 EL

  • Page 1 Versatile, energy efficient heating Sterling 3 kW Electric Model: Sterling 3 EL INSTALLATION & USER GUIDE PLEASE RETAIN THIS LEAFLET FOR FUTURE MAINTENANCE MODEL WARNING The STR3EL is a quiet High Level Fan Heater •Do NOT site the appliance in a corner.
  • Page 2 PROTECTION To connect a supply to the heater the curved top cover first needs to be The unit is protected in the event of fan failure, or an obstruction of the free removed. Looking directly at the output grille the top cover is secured by two airflow, by a single thermal PTC Self Hold Cut-out.
  • Page 3 THERMOSTAT CONTROLLER QUICK SET UP 8.Using the UP and DOWN Heat symbol 1. Ensure the heater is correctly installed and connected to the mains power symbols buttons on the SLVTB supply. controller set the temperature DO NOT TURN THE MAINS POWER ON AT THE WALL UNTIL INDICATED IN Up/down to the desired setting.