MANUALE D’ISTRUZIONI Vi ringraziamo per la preferenza accordata avendo scelto un prodotto TERMOZETA.. Vi preghiamo di leggere attentamente le informazioni contenute in questo manuale, in quanto Vi aiuteranno a sfruttare al meglio le caratteristiche di questo prodotto. Il presente libretto è parte integrante dell’apparecchio e deve essere letto attentamente prima dell’utilizzo perché...
Leggere attentamente questo manuale d’istruzioni poichè all’interno vi sono importanti informazioni sulla sicurezza, l’uso e la manutenzione dell’elettrodomestico. Conservare il manuale per consultazioni future. AVVERTENZE GENERALI • Questo apparecchio può essere utilizzato da bambini dagli 8 anni in su e da persone con ridotte capacità fisiche, sensoriali o mentali o con mancanza di esperienza o conoscenza se a loro è...
Page 4
• Si prega di tenere una distanza di 20 cm tra l’unità e la parete o altri oggetti per garantire la circolazione dell'aria. • L’unità è concepita per un solo per uso interno. Non per emetter che gli agenti atmosferici vengano in contatto con il prodotto.
. Questo dispositivo è caricato con gas infiammabile R290. ATTENZIONE: Il prodotto deve essere installato, messo in funzione e riposto in un ambiente con superficie superiore di 4m2.Non tentare di accelerare il processo di sbrinamento e di pulizia. ma seguire le operazioni indicate nel manuale. Il prodotto non deve essere installato in ambienti in cui sono presenti fonti di iniezione (ad esempio: fiamme libere, apparecchi a gas in funzione o stufe elettriche in funzione).
Page 6
DESCRIZIONE DELLE PARTI 1. Coperchio 2. Rivestimento sinistro 3. Rotelle 4. Display 5. Rivestimento destro 6. Piastra base 7. Cordone di alimentazione 8. Filtro 9. Serbatoio ACCESSORI OPZIONALI 1. Tessuto filtrante a carbone attivo(Opzione) 2. Strato filtrante in PU(Opzione)...
PANNELLO DI CONTROLLO Display a 2 cifre per Livello di umidità e timer L'indicatore presenta 3 funzioni: 1. quando l'unità è collegata, indicherà il livello di umidità ambientale. 2. quando si imposta l'umidità, indicherà l'umidità selezionata 3. quando si programma l'orario di accensione e spegnimento dell'unità, verranno visualizzate le ore. 4.
FUNZIONAMENTO Il cicalino emetterà un allarme quando l'unità si avvia, il LED mostrerà l'umidità ambiente per 3 secondi, quindi il PCB si spegnerà automaticamente. 1. Premere una volta per iniziare l'operazione. Premerlo di nuovo per interrompere l'operazione. L'unità è impostata in modalità Deumidificazione. Premere per 3-5 secondi, quindi la spia di protezione bambini funzionerà...
Page 9
tempo impostato. Se l'unità viene accesa o spenta in modalità operativa o piena d'acqua, la funzione di accensione/spegnimento automatico verrà annullata 5.Premere per regolare la modalità di lavoro tra la modalità deumidificazione e la modalità a secco. SCARICO DELL'ACQUA DI CONDENSA Quando il serbatoio di drenaggio è...
Page 10
1. Non rimuovere il galleggiante dal serbatoio dell'acqua. Il sensore pieno d'acqua non sarà più in grado di rilevare correttamente il livello dell'acqua senza galleggiante e l'acqua potrebbe fuoriuscire dal serbatoio. 2. Se il serbatoio di drenaggio è sporco, lavarlo con acqua fredda o tiepida. Non utilizzare detergenti, spugne abrasive, panni antipolvere trattati chimicamente, benzina, benzene, diluenti o altri solventi, poiché...
Page 11
PULIZIA E MANUTENZIONE Pulizia del Deumidificatore Pulizia del corpo Pulirlo con un panno morbido inumidito. Pulizia del filtro 1.Aprire la griglia e rimuovere il filtro dell’aria 2. Pulizia Passare leggermente un aspirapolvere sulla superficie del filtro dell'aria per rimuovere lo sporco. Se il filtro dell'aria è eccezionalmente sporco, lavarlo con acqua calda e un detergente delicato e asciugare accuratamente.
Page 12
Riposizionare il filtro Inserire il filtro nella griglia uniformemente e posizionare la griglia nella posizione corretta. CONSERVAZIONE Quando l'unità non viene utilizzata per un lungo periodo di tempo e si desidera conservarla, tenere presente quanto segue: 1. Svuotare l'eventuale acqua rimasta nel serbatoio di drenaggio. 2.
RISOLUZIONE DEI PROBLEMI Se si verifica una condizione elencata di seguito, controllare i seguenti elementi prima di chiamare il servizio clienti. Problema Possibile Causa Soluzione Il cavo di alimentazione è Collegare il cavo alla presa di connesso? corrente. La spia indicante serbatoio pieno lampeggia? (Il serbatoio è...
INSTRUCTION MANUAL Read this instruction manual carefully. Keep it for future reference. SAFETY WARNINGS When using the unit, please observe the following safety precautions: • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 16
• Discharge water that has collected in the tank as required • Do not operate the dehumidifier in a closed area such as inside a closet, as it may cause a fire • Install drain piping at a downhill grade to make sure that condensed water can be drained continuously. •...
When the unit is running in a room temp. between 5 , it will be stop to defrost for ℃ and ℃ every 30 minutes.When the unit is running in a room temp between 12 , it will be ℃ and ℃...
Page 18
PARTS DESCRIPTION 1. Top Panel 2. Left Shell 3. Caster 4. Display Screen 5. Right Shell 6. Base Plate 7. Supply Cord 8. Filter Box 9. Water Tank OPTIONAL 1. Activated carbon filter cloth(Optional) 2. PU filter layer(Optional)...
OPERATING INSTRUCTIONS Humidity Level & Timer 2 digit display The indicator features 3 functions:。 1.when the unit is turn on, it will indicate the room humidity level. 2.when you set the humidity, it will indicate the humidity that you have selected 3.when you program the time for the unit to turn on and off, it will show the hours.
Page 20
OPERATING INSTRUCTIONS The Buzzer will alarm when the unit start on, the LED will show the Room Humidity for 3 second, then PCB will automatically off. 1.Press button once to start operation. Press it again to stop operation. The unit is set into Dehumidifying mode. To press the for 3-5second,then the Child-Protection Key Lamp will work on that all the other key will not work then.Alternatively that press the...
Page 21
DRAINING THE COLLECTED WATER When the drainage tank is full, the tank full indicator light will turn on, the operation will stop automatically and the buzzer will beep 15 times to alert the user, that the water need to be emptied from the drainage tank . Emptying the Drainage Tank 1.
Page 22
Do not remove the float from the water tank. The water full sensor will no longer be able to detect the water level correctly without the float and water may leak from the water tank. 2. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use detergent, scouring pads, chemically treated dust cloths, gasoline, benzene, thinner, or other solvents, as these can scratch and damage the tank and cause water leakage 3.
MAINTENANCE AND CLEANING Cleaning the Dehumidifier To clean the Body Wipe it with a soft damp cloth. To Clean the Air Filter .Open the inlet grill firstly and remove the air filter 2. Clean the air filter Run a vacuum cleaner lightly over the surface of the air filter to remove dirt. If the air filter is exceptionally dirty, wash it with warm water and a mild cleanser and dry thoroughly.
Page 24
Storing the Dehumidifier When the unit is not being used for a long period of time and you want to store it note the following steps: 1. Empty any water left in the drainage tank. 2. Fold up the power supply cord and put it in the water tank. 3.
TROUBLESHOOTING If a condition listed below occurs, please check the following items before calling customer service. Problem Possible Cause Solution Has the power cord been Plug the power cord into the outlet. disconnected? Is the tank full indication Empty the water in the drainage The unit doesn't lamp blinking? (The tank is tank and then reposition the tank.
Need help?
Do you have a question about the Airzeta DRY and is the answer not in the manual?
Questions and answers