How To Assemble The Chamber Set And Body - Versapers EMOTION 5G Instruction Manual

12

How to assemble the chamber set and body

The assembling method is same regardless of strainer type.
Place the control lever of the chamber set to
[ CLOSE] as image
OPEN
Assemble the bottom of the chamber to bump of the
body. If the control lever is not placed at [
the chamber set and body will not fit completely.
If the sign [ ]on the body and the sign < >behind
of the chamber set are aligned well, it is perfectly
assembled.
NOTE
The main body itself will not work.
The appliance will not work if the chamber set isn't
assembled correctly even though it is on the body.
CLOSE
CLOSE]
NOTE
If the hopper is assembled according
to the safety sensor on the main body,
the appliance works even the hopper
is assembled in the opposite direction
as the picture below.